Counting matching models…
The default hopper that comes with the Eureka Mignon grinder is quite big and badly designed for single dose grinding. This hopper fits snuggly in the enclosure. It's also one of my first prints, so any improvements are welcomed. I'll…
Print approx. €3.60–€4.40 excl. taxPreliminary estimate for one variant
Voici un modèle 3D représentant un hérisson stylisé, avec des détails soignés pour capturer la beauté de cet animal sauvage. Parfait pour les amoureux de la faune ou comme décoration intérieure naturelle. Ce modèle peut être imprimé en…
Print approx. €2.01–€2.46 excl. taxPreliminary estimate for one variant
It prevents the fork and the portafilter from scratches. It simply klicks in place, sometimes a bit firm, so it can‘t fall off. Suggest to print in PETG, so it wouldn‘t deform with your preheated portafilter. It‘s also printable in TPU to…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for PETGSource material: PET
Auch die allerbeste Kaffeemühle ist hin und wieder inkontinent und verstreut Reste des Kaffeemehls in ihrer Umgebung. Seit ich diese Fangschale davor platziert habe, klappt die Reinigung mit einem Handgriff. Das Teil habe ich in einfachem…
Print approx. €1.18–€1.45 excl. taxPreliminary estimate for one variant
This ring fits directly on your stock dial like this ring for the first version. The advantage is a smoother dialing experience since you dont have a 3D-printed thread. to tighten up, i used a M3x6 screw, but it still sticks out. you can…
A larger adjustment knob for the Eureka Mignon Zero that is easier to read and far more precise and repeatable than the stock knob. Printable without AMS via manual filament changes. This remixed version has wider tick marks and numbers…
Upgraded my Mignon Crono to a grind by weight grinder. Since I needed to 3d print a new front cover to accommodate the new display, I decided I wanted the top cover to match. Since there was no models available, I created this one. Give…
Big dial for Eureka Mignon. This fits over the top of the original 22mm dial. You'll need an M3 x 4.6mm x 5.7mm brass threaded insert.
To complete this build you need a brass boiler cap base which you can get from several places. I bought mine here: https://coffee-sensor.com/product/la-pavoni-lever-boiler-cap-base-in-brass/ The shaft need to be made in PC (polycarbonat)…
This is a full replacement for the stock chute on the Eureka Mignon Specialita. It's a little wider and is less prone to clogging. It also has a built in funnel. There are two versions. One for use with a tilted base (single dosing) and…
This project is based on the AEG Mignon Model 4 typewriter (1923). The first model of the Mignon was designed circa 1901-1903 by the German company AEG, and subsequent versions found some popularity in Europe as an affordable alternative…
I only use my grinder for single dosing and have been using this mod for well over a year now. It is a joy to use and the retention is only 0.3 grams (3 beans).
J 'espère que vous appréciez mon petit ours mignon. Cela contient 2 fichiers, un sans couleurs et un autre avec couleurs . Ce fichier numérique est destiné à un usage personnel uniquement. En l'achetant, vous obtenez le droit de…
I remixed Cemk's excellent project by replacing the screw mounting holes with two 5x2mm magwells.
A larger adjustment knob for the Eureka Mignon Zero that is easier to read and far more precise and repeatable than the stock knob. Printable without AMS via manual filament changes. This remixed version has wider tick marks and numbers…
Auch die allerbeste Kaffeemühle ist hin und wieder inkontinent und verstreut Reste des Kaffeemehls in ihrer Umgebung. Seit ich diese Fangschale davor platziert habe, klappt die Reinigung mit einem Handgriff. Das Teil habe ich in einfachem…
Print approx. €1.18–€1.45 excl. taxPreliminary estimate for one variant
I like the " Yet Another Single Dose Base with Tilt for Eureka Mignon " very much. But, when starting the grinding process, my grinder would slightly turn away due to the momentun applied by the electric motor. So, Ive designed an…
Upgraded my Mignon Crono to a grind by weight grinder. Since I needed to 3d print a new front cover to accommodate the new display, I decided I wanted the top cover to match. Since there was no models available, I created this one. Give…
When the ground coffee was blown out of the grinder, the finest coffee particles were distributed around the grinder. As a result, a fine film of coffee dust has formed on the work surface. To avoid this, I designed an attachment (…
This is a replacement lid for the Eureka Mignon Silenzio grinder. It folds up and allows for quick refill of the hopper. Best for single-ish dosing of beans, as it is not as airtight as the original lid. Printed in PETG with 0.40mm…
When the ground coffee was blown out, the finest coffee particles were distributed around the grinder. As a result, a fine film of coffee dust has formed on the work surface. To avoid this, I designed this attachment for the dosing cup…
The Zero is the “single dose” version of the ubiquitous Eureka Mignon coffee grinder series. The overall build quality of this grinder is great and it quietly (and quickly for home use) produces fluffy, consistent grounds day after day…
J'ai voulu créer un cerf trop mignon avec des grands yeux plein d'étoiles. J'ai aussi créé une version avec une écharpe parce que parfois il fait froid. Si tu aimes cerf aux grands yeux, pense à m'envoyer une photo (soit en makes, soit…
A lid for a single dose hopper I found on printables: https://www.printables.com/model/227273-single-dose-hopper-for-eureka-mignon-grinders I embossed the text slightly which makes it easy to paint in slicers. If you don't want to have…
My Eureka grinder didn't come with a portafilter holder or the metal bracket to attach one. This builds on the model by @LegendaryCheez_87484 to replace the bracket with the following changes Tighter fit. Presses in snug and reduces…
Hi, I made a silicone mold for the Eureka Mignon bellows, which float around on Thingiverse and Printables since years. The original file, for which this mold uses a modified version of for the “insert” of the mold, likely came from user…
To complete this build you need a brass boiler cap base which you can get from several places. I bought mine here: https://coffee-sensor.com/product/la-pavoni-lever-boiler-cap-base-in-brass/ The shaft need to be made in PC (polycarbonat)…
Version(s) V1.0 - 15Nov24 - Initial Design ---- Description Bottomless portafilter holder & tray combo. Slides back and forth a little to aid with pressing the start button. The recess at the back will stop any vibration that makes it…
I first printed W0lf92's Knob Sleeve, but quickly realized that it didn't quite work for me. The Knob did grind away my original indicator on the right frontside of my mill and also pushed down my Grind Settings Dial (v2), so it's lid…
I don't use the platform and cup, but it better when the machine is tilted.
Gaggia portafilter funnel, remixed with a Eureka Mignon grinder chute cutout. Needs supports
This is a coffee grounds tray sized to fit a Eureka Mignon Stark grinder, with a fluted detail. It has a stepped rear lip to fit over the chrome base on the Stark, but it should also fit the Eureka Mignon Oro XL.
dient um die Einstellung des Mahlgrades im Büro vor unbefugten Zugriff zu schützen, wie z.B. in öffentlichem Büro es ist keine 100% Verschluss, es dient mehr zur “Abschreckung” wahlweise mittels Kabelbinder oder kleinem Kofferschloss…
Replacement rubber for Eureka Mignon Libra grinder which improves stability for bottom-less portafilter holders. This design is slightly wider and a few mms longer than the original. This enables bottom-less portafilter holders to rest…
Battery dispenser for 17 AA mignon batteries. I was inspired by the great design from adoniram with his version of a battery holder thing:1004996 . But I had trouble with stucking batteries so I decided to design a complete new one which…
Tilt stand for an early version of the Eureka Mignon MCI in a 15 degree angle. Printing I used automatically painted supports. 0.4mm nozzle 0.2mm layer height speed profile on MK4 Also take a look the hopper adapter if you’re not using a…
I use a 15deg stand for my eureka mignon MCI grinder to reduce grind retention within the grinder but want to keep the ~ 220g hopper. I designed this adapter to counter the 15deg stand and use the standard hopper. I printed mine with…
The Temper station replaces the Lid of an Eureka Mignon Mill with a Lid of 120mm x 120mm. It has place for a Temper, Leveler, Brush, blind screen all fitting to a E61 groupset (58mm).
Ich machte es um das einstellen des mahlgrades zu vereinfachen
Upgrade your Eureka Mignon grinder with a single-dose hopper and bellows for precision and convenience. Designed for minimal retention and maximum freshness, the compact hopper accommodates single servings of coffee beans, ensuring each…
Wanted to add a slow-feeding pre-breaker to my Eureka Mignon Facile (primarily so I could more easily use their Filtro Pro burr for espresso) so I built these holders to mount a handgrinder to the top. All have a lip on them to accomodate…
Heyyyyyy, Je continue dans ma série des créatures imaginaire dans votre plus grand bonheur ! Je lance cette série uniquement en MultiCouleur pour plus de beauté et d'originalité ! J'atteste que tous les fichiers on était tester et imprimé…
A simple piece that allows the single dose forks from the original model to fit on a Mignon Manuale. Uses the standard screw that comes with the grinder to attach the original fork. The fork here…
Note: this Mod Kit has been deprecated. Check out V2 here https://www.printables.com/model/1225053-eureka-mignon-coffee-grinder-single-dose-mod-kit-v The Eureka Mignon series is one of the best value grinders in the market, but it’s a…
This stand for the Eureka Mignon coffee grinders features a 14-degree tilt. Installation requires only the original screws and the existing strain relief – only a new cable tie is needed. The conversion should only be carried out by a…
Eureka Mignon Fork Remix Upgrade your Eureka Mignon grinder with this custom fork designed for use with a tilted bed in single-dosing operations. This remix of TrafficBroker's original design ensures a secure and precise fit for…
Hi, this is my version of a Knock-Box to perfectly fit my Eureka Mignon Specialita Coffee Grinder. In addition, the knob for the drawer is a re-creation of the Rocket “R” Letter. Note: I Printed the Knock-Rail in two steps. The outside…
Since the dial from the „ Grind Setting Dial V2.0 “ was so hard to turn I looked for sleeves but there weren‘t any for the specialita, so I modelled my own version to fit the gears. Now I can use the original dial, which runs a lot…
Ticks all the boxes: Stays in place with two snap connectors. Uses minimal amount of material. Is almost flush with the surface, but still is easy to remove. Prints witnout supports. The other plugs I found were only a pressure fit and…
It is designed to be a perfect fit without the filthy gap underneath in the edges (dead room). The funnel is big enough for easy fill in and can hold ~25g. Removing the insert doubles the space for beans. The plunger goes ontop the beans.…
No more wasting counter space with espresso grinder accessories - this holds a dosing funnel, spoons and puck screens vertically next to an Eureka Mignon grinder, in an easy-to-reach grab-and-go position for easy and fast morning…
OK coffee geeks, here's a twist on Eureka’s brutalist art deco style, in 3D-printable kit form. The Eureka Mignon series is one of the best value grinders in the market, but it’s a multi-dose design. Many home baristas single-dose shots…
Coffee funnel for my Eureka Mignon & Lelit PL81T 57mm carrier, should fit fine for a PL41TEM. The side-opening fits the eureka outlet nicely, lets you press the button and you can leave it on when using the tamper. The default inner…
The original model is a fantastic idea, yet I it lacked the PCB holder. Instead of adding a tilted stand to your grinder, just replace the original base. As a benefit, the button is moved to the front left, which at least for me is…
These two pieces form a portafilter holder that fits a Eureka Mignon Manuale grinder. They may also fit other variants of Eureka Mignon grinders, so if you try them out and they fit, please leave a comment or post a make so that I can…
Cute Phoenix bird figurine - Mignon oiseau Phoenix. Generated from BambuLab MakerLab. The 3mf file is 4-colors for Bambu Studio. If you download it, please like.
Cute unicorn figurine - Mignonne licorne. Generated from BambuLab MakerLab. The 3mf file is 4-colors for Bambu Studio. If you download it, please like. Update 05/05/2025 : Refined 3mf file for less filament changes
Cute fox in fire (Firefox) figurine - Mignon renard en feu (Firefox) Generated from BambuLab MakerLab. The 3mf file is 4-colors for Bambu Studio. If you download it, please like.
Cute biker fox with helmet figurine - Mignon renard motard avec casque Generated from BambuLab MakerLab. The 3mf file is 4-colors for Bambu Studio. If you download it, please like.
Cute dolphin with clothes and hat figurine - Mignon dauphin habille Generated from BambuLab MakerLab. The 3mf file is 4-colors for Bambu Studio. If you download it, please like.
Just a simple funnel for the Eureka Specialita grinder. It should work for all mignon series grinders. This one is designed to be used with the 15 degree tilt base for single dosing. Keeps more grinds in the cup/portafilter. The little…
Other large dials have ~ 1:3 gear ratio and fairly small dial, which is not sufficiently precise for espresso, especially if you grind extra fine for small doses. This dial is whoping 6cm in diameter and features 1:1.3 ratio, and full 240…
May need to heat up the print to fit some hoppers.
Eureka Mignon Grinder Base with Manual Timer. Footprint Compatible (180x180mm) This Remix is tailored for the Eureka Mignon grinder series and includes an integrated slot for models with a manual timer. The design is optimized for 3D…
🟥 Parfait pour l’impression FDM en couleur ou en mode monochrome, ce modèle nécessite peu de supports. Faire attention en retirant les supports sur les parties fragiles. Ce petit ankylosaure à l’air paisible, mais ne t’y fie pas : sa…
🟥 Parfait pour l’impression FDM en couleur ou en mode monochrome, ce modèle nécessite peu de supports. Faire attention en retirant les supports sur les parties fragiles. Avec sa tête blindée de bosses et son air un peu boudeur, ce petit…
I created this hopper connector after tilting my Eureka Specialitá by using a tilted base. It compensated the 14 degree tilt so that the hopper remains straight and untilted. Printed in PETG with 0.4 mm nozzle and 100% infill. The model…
Printed in TPU 95A with 100% infill. The feet are tilted by 14 degrees and the back feet are cut off to not protrude beyond the base. The fit snugly in the screw holes. Once pusched in the stay in place without further fixing.
This is a 9.5 degree tilt which I felt is about the limit whilst ensuring the beans still flow easily. The bottom has 4no. 8.2mm inserts for 8mm rubber pads.
Falls keine Baby zur Hand eine schnelle hilfe.Enfach eine AAA einsetzen .
Instead of having the Knob completely replaced this is a sleeve for the original knob. it keeps the style of the original knob except for the white inlay. You can tighten the fit further with a screw inserted from the side.
We all love our Eureka Mignon grinders for their boxy design and build quality. However, when consuming larger amounts of coffee, the reservoir needs to be refilled frequently. This model provides interlockable segments, allowing you to…
I created this simple adapter to go from an Atom short hopper I had laying around to my Specialita. If you have the height, you can also adapt the tall hopper. Compatible to adapt from: LUCCA Atom, Eureka Atom 65, 75, W 65, W 75, Zenith…
MOAB - Mother of all Bellows or Massive Ordnance Air Blast: A bellows and dosing cup combo designed for the Eureka Mignon grinders. Designed by Amahoola and me. Demo Video: Features: Functions as dosing cup AND bellows, at the same time!…
Petit figurine mignon parfaite pour décorer votre maison. Ceci est ma toute première création !
This is a remix of Oelsi's inclined base for the Eureka Mignon Specialita. I raised it up ¾ of an inch higher and added a channel underneath for wire management.
This is a GBW modification to the Eureka Mignon Specialita. I'm happy with my Specialita but I wanted to skip the single dosing step of weighing my beans each time I made an espresso. Now i can turn on the machine and hit grind and it…
Small adapter to add to your Eureka Mignon that fit the aeropress and allows you to dispense you coffee dose with either a press against the Eureka or just a down movement. Print the 3 parts, assemble and lock it with 11mm length…
This is a full replacement for the stock chute on the Eureka Mignon Specialita. It's a little wider and is less prone to clogging. It also has a built in funnel. There are two versions. One for use with a tilted base (single dosing) and…
I didn't like the existing versions of the incline Stand, so i made my own. Its light in filament use and has a vibration dampening mat. Its 9° inclined and has a cutout in the middle. 2 walls and 20% infill is enough, do more if you want…
My portafilter is modified original part with the bottom machined off. It may not work for other styles.
This is my take at a 58mm Cup Holder for the Smart-Grind-By-Weight mod by jaapp (https://github.com/jaapp/smart-grind-by-weight) The cup fits nice and securely, leaving enough clearance. The cup holder slides over the load cell and screws…
Modded version of 58mm cup holder for for Jaapps Smart-Grind-By-Weight mod for Eureka Mignon. Thinner side walls
This project is based on the AEG Mignon Model 4 typewriter (1923). The first model of the Mignon was designed circa 1901-1903 by the German company AEG, and subsequent versions found some popularity in Europe as an affordable alternative…
This design allows you grind directly into the portafilter. It reuses the original portafilter fork. You will need an m3x3 insert
Gedanken dazu: Leider habe ich das Gehäuse für diesen standard Thermometer erstellt, bevor ich nachgeschaut und etliche davon gefunden habe. Wie dem auch sei, ich stelle mein Design auch mal online. Ich wollte ein möglichst minimales…
The shalf is a remake of the La Pavoni Mignon/Europiccola/Professional boiler cap. It covers the shalf only, please use the handles from original model designed by @SveinHa The shalf is without the holes on the bottom and instead has the…
This is a remix of the Smart Grind by Weight Mod for Eureka Mignon made by jaapp (excellent work): https://github.com/jaapp/smart-grind-by-weight Main differences are that it is adapted for the following inclined base for Eureka Mignon:…
A no-mess dosing funnel for Eureka Mignon coffee grinder to use with 58mm portafilters.
This is based on the 'Eureka Dosing Cup Holder - 120 deg - 54mm - knob v2.stl' file from the remixed item. I found that my dosing cup moved around due to vibration during grinding, so I made a thin TPU sleeve to fit over the prongs. This…
A funnel for grinding directly into a Quickmill portafilter without creating a mess. It mounts on top easily.
J 'espère que vous appréciez mon dragon articulé ,Il est amusant à manipuler. cela contient 2 fichiers, un sans couleurs et un autre avec couleurs . Ce fichier numérique est destiné à un usage personnel uniquement. En l'achetant, vous…
I only use my grinder for single dosing and have been using this mod for well over a year now. It is a joy to use and the retention is only 0.3 grams (3 beans).
J 'espère que vous appréciez mon petit ours mignon. Cela contient 2 fichiers, un sans couleurs et un autre avec couleurs . Ce fichier numérique est destiné à un usage personnel uniquement. En l'achetant, vous obtenez le droit de…
I remixed Cemk's excellent project by replacing the screw mounting holes with two 5x2mm magwells.
wors with the original King size dial or every other 50x10mm dial required hardware: 2x M5x20 allen screw ,2xM5 nut andouble sided tape The dial and arrow are fixed with doublesided tape insert and glue the nuts into the adapter and…
