Spirographic WDT tool (54mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spirographic WDT tool for 54mm portafilters for coffee distribution
- Ocena
- 2,5 / 5
- Polubienia
- 38
- Pobrania
- 283
- Wydruki
- 2
- Wyświetlenia
- 4737
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a remix of @muehles_822209 spirographic WDT Tool. This is for 54mm portafilters.
NOTE: I just played around with the sizing of the original files to fit the 54mm portafilter. I have NOT TESTED THIS YET as I am still waiting on the screws and needles to come in. Will update when fully printed and tested.
UPDATE: I did get a chance to print the entire tool, minus the stationary needle carriers, and the gears fit ok together. The second smallest gear is a little too thick (about 1mm too thick) and may not screw down properly when using m3x8 screws, so I have updated that in the files to compensate for that (Gear(23 Teeth)_v2.stl). For the screws to fit in the central hole of the gears, I did have to widen them a bit using a screw bit, and then they fit well.
I tried playing around with locking in the bottom of the tool onto the portafilter (See Base_V2.stl), have not tried it yet.
Please let me know if there are sizing issues.