Qidi Plus 4 Door Handles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Presented are a few different options for door handles on the Qidi Plus 4. 2x3mm Heat set inserts required per handle.
- Ocena
- 5 / 5
- Polubienia
- 38
- Pobrania
- 133
- Wydruki
- 2
- Wyświetlenia
- 817
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Overview
Presented are a few different handle designs for the Qidi Plus 4. A step file is also included for easy remixes. 2x 3mm Heat set inserts are required per handle. Stock hardware will thread into the inserts. Inserts need to be installed with a soldering iron. Have you ever printed a handle with TPU95A? Try it, leave infill at 15%. It leaves a pleasant texture to the hand and is very sturdy. The stock handle had to be slightly modified to allow for the heat set inserts. The embellishments on the sides are a bit shallower than the original.
*Image of heat set inserts installed on a handle
Printing
⚠HEAT SET INSERTS ARE REQUIRED⚠
No supports are required for any handle.
STOCK-Print face down, insert holes up.
ANGULAR-Print bottom down, insert holes on build plate.
GRIP-Print laying flat on side.
CURVED-Print on front edge as in pic below. Possibly add brim for more stability.
*image of curved handle
Nozzle: .4
Filament: PLA/PETG/TPU
Layer Height: .2
Supports: No
Take a look at my other Qidi Plus 4 Add-ons while you are here, or any of my other 3D Printing accessories
Like my work?
❤ a few of my models
and/or