Ender-3 V3 Plus: Re-Positioning Ceiling Spool Holder & Sensor Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Many Creality Fan might faced some issue of this printer, one of the critical issue in this case is PTFE hit upper frame
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 119
- Wydruki
- 1
- Wyświetlenia
- 701
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Dear Creality Fellow, as many of you might or mightn't know about the new Ender-3 V3 Plus came out with main critical issues, I personally hit purchase button before checking review from the internet, and well I have to accept the consequences.
According to many Youtubers and 3D Printing Influencer, they mentioned about the PTFE tube hit the upper frame while it do homing, and it could potentially made the 3D printer clogged and under-extrusion during printing.
So my solution is removing the sensor from the Z-gantry, then placing on the top and in front of the frame, reconnect the PTFE tube in front also to prevent it from hitting the upper frame. Additionally, I design an items to make its spool holder kit upside down installed it on the wooden ceiling and try to not adding more weight on the 3D printer preventing too much vibrtion while it's working.
Print Requirements:
- Materials Type: PETG
- Infill - 30%
- Layer Height - 0.2mm
- Support - Needed