Fuji GW690ii Hood
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Direct replacement for the Fuji GW690ii plastic cage that holds the lens hood in place.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 94
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
The plastic cage that holds the lens hood and covers the aperture and shutter dial controls often breaks due to age. This is nearly a 1:1 replacement. I had made a model that includes the ledge for the clear acrylic window for the shutter speed indicator line but found it to print unreliably unless using a resin printer. To still allow a reference line, I filed a small notch into the metal base ring closest to the focusing ring once everything was installed.
You will need to drill 2 small holes using the aluminum base ring as the template prior to installation.
I recommend printing from PETG or similar material to allow for forgiveness from hard bumps to prevent the cage from snapping.