Fuji GW690ii Hood
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Direct replacement for the Fuji GW690ii plastic cage that holds the lens hood in place.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 9
- Makes
- 0
- Views
- 94
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial
The plastic cage that holds the lens hood and covers the aperture and shutter dial controls often breaks due to age. This is nearly a 1:1 replacement. I had made a model that includes the ledge for the clear acrylic window for the shutter speed indicator line but found it to print unreliably unless using a resin printer. To still allow a reference line, I filed a small notch into the metal base ring closest to the focusing ring once everything was installed.
You will need to drill 2 small holes using the aluminum base ring as the template prior to installation.
I recommend printing from PETG or similar material to allow for forgiveness from hard bumps to prevent the cage from snapping.