221 models
Simple and Minimalistic Polaroid photo stand Designed this to accommodate some of the dozens of polaroid photos we have laying around the house, prints quickly and looks good in numerous colours. The stand holds the photos at an angle…
Note. You have to salvage a lens from a disposable camera. The one I used is from a Kodak fun saver Update v.1.2: Added a knob to lock the focus and adjusted some dimensions. Find a small screw, glue it to the knob and drill out the hole…
Hotshoe cover with Fuji X logo. Measured and tested on my X-T20, but should fit practically any hotshoe on any camera.
Design for supportless printing, had tried on XF35mmf1.4, XF56mmf1.2 and XF90mmf2.
I've tested it on Fujifilm X100T and X100F, but it should work with X100, X100S, and X100V too. It has a snug fit so it won't need a screw to stay in place like the ones you can buy do.
This is a modified version of the "Instax Photo Frame" by o0aaron0o, you can display 3 photos instead of one. Note: It was printed using Cura 4.4.0 with raft and tree supports only. Category: Decor
I created a stand version from my Christmas tree hanging photo frame found here. Reference: https://www.prusaprinters.org/prints/93150-instax-mini-photo-frame-tree-ornament Add the photo and place wherever you like. Update: 06/06/2022…
I couldn't find any frames for the Instax Square Instant Photos so i modified the "Instax Photo Frame" by o0aaron0o Note: It was printed using Cura 4.4.0 with raft and tree supports only. Category: Decor
Various designs for a HotShoe-Cover suitable for Fujifilm cameras. I have taken the dimensions on my X-T4.
I tried many of the thumbgrips I found online, but I didn't like any of them so I made my own. I took the best of all designs I tried and combined it into one design to rule them all. You might need to sand it down a little for a smooth…
LEICA style lens hood for fujifilm XF23 f2
The Fuji X-T10, X-T20 and X-T30 are great little cameras, but the grip is a bit small for larger hands: your pinkie has no-where to go except under the camera. This newly updated grip provides full support for all of your fingers, yet…
Case for fujifilm NP-W126 and NP-W126S batteries. Optimal wall thickness for the most minimalist design possible. Original and non-original NP-W126 / S batteries fit into the case. Recommended PRINT SETTINGS: layer heigh: 0.13 - 0.18…
**Print Instructions** Supports: No Resolution: 0.15mm or 0.20mm Infill: 10% Printed with MMU2s. But you can print it also in single pieces and glue it together or without the “X”.
This is a remix based on a hot shoe thumb grip for the Fujifilm X-A7. Following changes have been made: adapted to the Fujifilm X-E4 resized the part that slides into the hot shoe for a snug fit shortened the grip length
Remixed from VZPHOTOs Fuji X100V Thumbgrip. For XT20, I needed it to be a little longer so here it is.
Reverse engineered JJC TA-XPRO3 grip, not the exact same dimensions but very similar. If someone needs a more FDM friendly version, just write me.
I adapted the Diameter of the Adapter as well as the Flange to fit Fuji X-Mount Camera. Please visit @volzotan_217694 original Design for detailed instructions. Use the Fusion File to adapt the focal length. The Images I uploaded are jpgs…
Lens cap for fujifilm G (GFX) system based on the original cap. No supports needed. I use PETG with 0.4 nozzle 0.2 layer but PLA should also works. I also printed this on resin printer and also fits great.
Fujifilm Instax Wide Photo Frame I couldn't find any frames for the Instax Wide Instant Photos so i modified the "Instax Photo Frame" by o0aaron0o Note: It was printed using Cura 4.4.0 with raft and tree supports only.
WORK IN PROGRESS: I am still finetuning this design. PK-FX#2v10 is final… for now. I made an adapter to use my old Pentax 50mm lens on my brandnew Fujifilm X-S20. The lens will be fully manual of course, just like in the old days…. ;-)…
Eyepiece or Eyecup that fits Fujifilm X-T4 X-T3 X-T2 X-T1 XT4 XT3 XT2 XT1 X-H1 XH1 GFX100 GFX 50S Models. I made this design for my Fujifilm X-T1 but it should fit all the models listed above. It was printed with a 0.1 layer height on a…
Mounts m42 lenses or helicoids to Fujifilm mirrorless cameras. Note that this is primarily for adapting projector lenses with a focusing helicoid. So, the flange distance is a lot thinner than normal. A conventional m42 lens will not have…
I don't know if it works with other models. Will probably need some sanding after printing in order to fit. Can also be printed in other materials. The one you see in the photo is -sanded with 180 and 400 grit -primed -sprayed black
Perfect and secure fit. Correct focal length. Easy to print. Supports are only needed for "Canon side" clips. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.2 Infill: 25% Filament:…
Ultra-compact 9mm tall rear lens cap for Fujinon X mount lenses. Standard Fujinon cap is 13.5mm tall, I like more compact Voigtlander cap design for Fuji X lenses. At some point I realized that most Fuji X lenses I have do not protrude…
Print worked perfectly with PETG, 0,1mm setting. Infill doesn't matter.
Square style lens hood and cap for the Fujifilm 35mm F2 WR lens. Example was printed on a Bambu Lab A1 using eSUN Upgraded Matte PLA Filament with a 0.4mm nozzle and a layer height of 0.2mm. The model can be printed without the use of…
A Box for films and instantpics for Fujifilm Mini V2: tighter pressfit
The Fuji X-T3 is a great little camera, but lacks an Arca-Swiss mounting plate. Also, the grip is a tad small, would benefit from a bit more beef. This newly designed grip provides both features, yet doesn't block access to any of the…
This is a remix for the larger NP-W235 batteries used on cameras like the FujiFilm XT-4 and later. The holder can house 3 batteries. Ideal layer height is 0.2mm - you can choose to print the logo in a different colour should you choose,…
This square lens hood for the XF 27mm f/2.8 lens is designed for two-part printing. Print the threaded base and the hood separately. Screw the threaded base into the hood to your preferred depth and secure it with glue. Leave about 2mm of…
These files are for Personal Use Only . If you would like a Commercial License to sell prints made from these designs, please join me on Patreon : https://www.patreon.com/kazitoad This is designed with spring loaded retention clips and…
You may need to adjust the scale for a perfect fit I printed 4 versions (100% 100.5% 101% 101.5%) to find the best fit at 101% for my 35mm lens Printing suggestions: 6 wall loops Variable layer height / smooth layers Automatic bridging…
This is a simple adapter to allow you to attach your Fujifilm mirrorless camera directly to your telescope with a 1.25" eyepiece. Printing it slower to ensure accuracy is probably best. The locking pin does work. It's a snug fit and so…
my own designed fujifilm xm5 handgrip, you can use ¼" for the 3 thread inserts
We recommend you to print with PLA/ABS/Nylon
Protective cover for the Fujifilm battery NP-W235, the battery for the X-T4
I have lost the camera's back thumb rest molding due to the adhesive given out, so I designed one that fits perfectly when printed with my calibrated 3D printer and retains the original's aesthetics. Even with non-calibrated printers I…
Designed this thumb grip for the Fujifilm X-E2 to sit in the hot shoe and forms around the wheel on the top. Printed upside down with some supports
The Fuji FUJINON XF16-80mmF4 R OIS WR lens is a well regarded “kit” lens, known for being sharp and versatile. It normally comes with nice hood, but this often gets lost or damaged. I searched everywhere for a replacement and, other than…
Hi! I didn't find some nice easy to print simple picture frame for Fujifilm instax mini so i draw 5 models. Really easy to print. You can print the 5 frame on a MK3S in one print with no skirt. Their hole in the back to hang them on some…
Prints in place without supports. Fits around 25 films.
Summary --- This is a 3D printable body for the plastic lens element from a FujiFilm QuickSnap disposable underwater camera. The Fuji website claims this to be a 32mm lens, which comes to 64mm equivalent on M4/3, from what I understand. I…
MORE INFORMATION : https://leonardoramazzotti.github.io/leonardo_ramazzotti_links/fuji.html <div class="article">
UPDATE [2024-04-26] : Designed improved adapter angular version II 49mm adapter ring for Fujifilm X100 series cameras. UPDATE 01-02-2024: Added V2 with more smooth walls. Remixed the source adapter by doubling its 49mm thread to other…
Untested - 18mm pinhole lens for fuji x-mount
I got a fujifilm instax mini 11 as a christmas gift. The buttons included with the camera did not stick on the double sided tape they came with, so I fired up Fusion360 and after 30min of modeling and 10min of printing I got this. Because…
The Fuji X-H2 and H2S are great cameras. This new grip expansion provides full support for rapid mount Arca-Swiss tripods, yet doesn't block access to any camera features, such as battery, display etc. In case you DO want to use a…
Print with no supports, upright. The original creator designed a custom support to avoid the Cura calculated ones, it just snaps off with some long nose pliers. I used a 60mm/s print speed on my Ender 3 Pro, and the Standard Quality…
A battery case for the fujifilm NP-W235 Une boite pour les batterie fujifilm NP-W235
Rugged box case for 2x NP-W126s Fujifilm Batteries, nice and slim for taking it with you in your bag. You will need 3x M3x20mm Screws. Edit 2025/01/06: Updated the lid to have more clearance to close easier without interfering with the…
Minimalist thumbgrip for Fujifilm X-E5
The Fujifilm Instax SQ1 button is far too easy to press. This little cover just helps prevent those accidental shots by reassessing the button. With my printer tolerances, the clip is a slight press fit over the lanyard eyelet, which…
I designed it to protect my Fujifilm NP-235 batteries, these aren't cheap so i prefer not to throw them with exposed connectors. I couldnt find any model with decent lock mecanism, so here it is. Fits the XT4, XT5, XH2 and XH2s batteries…
This model allows you to attach any camera with a Fujifilm X series lens connector to a 1.25" telescope. The telescope side and camera side are separated for easier printing and attached together by M3x8 screws. There are three versions…
it is best to print with flexible filament
The xpro-3 has a hidden screen and the idea of hiding my screen to be more in the moment of what i'm shooting. Fujifilm didn't announce the xpro-4 so here's my next best alternative. I was inspired to design this when I saw a seller on…
A Box for films and instantpics for Fujifilm Wide.
This is a printable model of the mount found on Fujifilm X lenses, which you can use to design accessories like extension tubes or custom lenses. Print at 0.1mm layer height in ABS (recommended), PLA, or PETG. For ABS I had to set my…
Front cap for Fuji medium format camera bodies
Simple lenscap with knurling to match the design language of the camera. Made to be printed in TPU. The model does have quite tight tolerances, but the friction fit is perfect printed on my Prusa MK3 with “Fiberlogy TPU Fiber 40D". If…
These files are for Personal Use Only . If you would like a Commercial License to sell prints made from these designs, please join me on Patreon : https://www.patreon.com/kazitoad This is a lens cap specifically designed for the Fujifilm…
This holder will hold multiple pictures if need be! Infill of 10/15%, 2 walls, 0.2mm
Fujifilm X-E5 Grip Better grip feeling and better stability. Supports needed for the bottom screw hole.
Fujifilm x100vi shadowbox 4Lx2Wx6H Space is optimized so two batteries can also be included Model sits snug, use the eyelets to pull it out if it is too snug, it does not wiggle much. Model stops below the eyelets so you can leave a strap…
Film advance lever for the Fujfilm 6x9, 6x8 and 6x7 rangefinders. Modern III type. Will not fit older models. Print instructions I print mine in 0.1
Simply print the model and add your photo, either Fujifilm Instax or Polaroid. If you want to give it more stability, you can use two for each photo. The shorter side is for Instax, and the longer side is for Polaroid. 2g Print in place.
**Print Instructions** Supports: No Resolution: 0.15mm or 0.20mm Infill: 10% Printed with MMU2s. But you can print it also in single pieces and glue it together or without the “X”.
So I already had two fujifilm eye cups break on me the same way. I catch with the eye cup somewhere and the inner part into which the two little screws go breaks around the threads. I recreated the part by measuring with my calipers and…
49mm to 52mm filter adapter for Fuji X100V / X100VI camera - angular version II This model is allowing to use more common 52mm filters on Fujifilm X70 cameras. Model is designed from scratch using BoltFactory Blender plugin. Adapter is…
Like everyone else here, i got excited when i saw the model for my 23mm F2 with the window but was disappointed to see that the model got removed or canceled. When i printed it i noticed that the turning was really tight due to the…
I printet it out of PETG with an 0.25mm nozzle The thread is perfekt for ajusting the focus distance. I will try to make one with an larger aperture
A grip for the Fujifilm X-E4 that provides access to the battery and SD card without removing the grip. You can use a standard ¼-20 camera accessory screw to attach it via the tripod mount screw. Thanks to the maker of the original model…
Originally printed on an SLA Anycubic Photon Ultra printer in Anycubic gray tough resin. Shutter housing with removed leaves epoxied to the adapter. V1 is non-locking to the body, use at your discretion. A small writeup can be found here .
Really useful battery holder to keep the batteries within reach, great for multiple scenarios! I made it in tpu to have the best fit, it also protects the connector on the lower side.
I advise printing on a small layer height. I printed it at 0.12mm. Printed on a Bambulab X1 Carbon, using TPU-CF. Should work with normal TPU as well.
Sorry I forgot to take a photo before glueing together. The OG model is super nice and would work well with supports. I just suck at getting my support settings right and I don't like the rough surface my supports always leave behind.…
A small case to hold one extra SD card and an extra NP-W126S battery. I made this to ride along with my X100V but it would work with a variety of fuji cameras that use the NP-W126 series batteries. I printed in PETG with a 0.2mm layer…
stand/frame for 5 Fujifilm Instax photos. This model was printed in ABS without support, 15% infill, 2 wall loops, but can be printed with other materials.
Custom adapter to mount Magnifying Eyepiece on Fujifilm X-T30 camera and alike. With e.g. SMDV 1.33x magnifier it is making view larger than Fujifilm X-T5 or Nikon ZF (see pictures). Here's extended article on the ongoing effort and…
The following is a collection of Gridfinity creations for my Fujifilm X-E4. The following prints were created to store the camera, lenses, batteries and soon other items in an Alex drawer. Please when printing the XE-4 storage bin, flip…
What it is: A compact Arca compatible tripod plate designed around Peak Designs Anchor mount for fujifilm XT2 and XT3 cameras. The Peak Design Anchor mount allows you to mount your camera strap or wrist mount to the bottom without…
Mount your FujifilmX camera to a telescope.
Keep your spare batteries safe in your camera bag witha simple slide-in battery cover/protector for Fuji NP-W235 batteries. Designed to be a perfect fit with a satisfying ‘click’ when the battery is completely in. Open on the bottom to…
This is the replacement battery door clip for a Fujifilm instax mini 7s. This clip slides into the battery cover and helps keep the cover on.
Remix of thumb grip for Fujifilm X-E2 (may work with X-E1 too). Use PETG or stronger (PLA will eventually loosen). I printed at 0.08mm layer height with tree supports under the hot shoe overhang. You'll likely need to sand the bottom of…
I found this model on Thingiverse, but I usually bring 2 additional batteries to my travels and wanted them to be held together, so I created this remix.
This is a very compact arca-type tripod plate designed to fit the Fujifilm X-T4. It's designed to match the shape of the camera body and brace against it to stay secure, while leaving plenty of room to get the battery out without removing…
Designed for two Fujifilm NP-W126S batteries and three full-size SD cards , with a hinged lid, reinforcing ribs, and a separate latch. The batteries and cards sit slightly above their compartments so you can grab them easily. What fits •…
The shiny gray dial on my instax mini evo didnt look very nice, so I designed this one and made it in black, now my camera looks 5% cooler and works 0.05% better. It is a replacement for the original dial, so, first remove the gray dial (…
Gridfinity shadowbox for XF16-55mmF2.8 R LM WR Fujifilm lens, as I could not find another suitable shadowbox model for this lens. The holder can fit the lens with or without the lens hood. Unit dimensions: 3Lx4Wx6H Printed on AnkerMake M5…
Thumb rest design for the Fujifilm X-pro 3 (It may work with other cameras). I printed in PLA with 0.18 lay height. Support are required!! There are 2 version, one with a nub and one without. The nub is there to minimise flex as it rests…
Well, my mini Evo wasnt looking very cool, so I made it look cool. Doesnt make any better pictures tho, I tried and pics were the same without the mod. There are 2 models, one that is displayed is the one with 3 magnets (fi6x2.65mm) for…
Hey, I created this Lenshood for my Fuji XC35. My print is with the Fuzzy-skin, so scratches are not that kind of a big deal. The g-code is also for PLA with 100% infill. So it is robust, even if it weighs a few grams more. Hope you have…
Adapt Mamiya 645 lenses to a Fujifilm GFX Body ATTENTION - YET TO BE TESTED - I havent aquired a Mamiya lens myself yet to test the adapter. Feedback is appreciated! .stp files for further adjustments included
This thumbrest is a spare part for the FujiFilm X-T10 camera. In case you are one of the unfortunate guy, who lost the original thumbrest! ;-) (Glue it in place) Print Settings Printer Brand: MakerBot Printer: MakerBot Replicator Rafts:…
I tried many of the thumbgrips available online for the Fujifilm X100VI, but none of them felt right for me (apparently I have short thumbs), so I decided to make my own. The model is designed for upside down printing with supports, which…
