1 / 3
Fujifilm XF 27mm Squarehood
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple squarehood for the XF 27mm 2.8 Lens
- Rating
- 5 / 5
- Likes
- 21
- Downloads
- 236
- Makes
- 4
- Views
- 995
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Share Alike
This square lens hood for the XF 27mm f/2.8 lens is designed for two-part printing. Print the threaded base and the hood separately. Screw the threaded base into the hood to your preferred depth and secure it with glue. Leave about 2mm of the thread for mounting to the lens.
Do not use glue on the lens!!
Recommended print settings: 0.4mm nozzle, 0.12mm layer height.