606 models
Simple and Minimalistic Polaroid photo stand Designed this to accommodate some of the dozens of polaroid photos we have laying around the house, prints quickly and looks good in numerous colours. The stand holds the photos at an angle…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm Filaments Used: PLA Smartfil Reciclado Negro Transmission Distance: 0.2 PLA 3DFils Galactic Red Transmission Distance: 5.8 PLA 3DFils Galactic Gray Transmission…
This adapter allows you to mount any finite RMS microscope objective (i.e. objectives that are marked with "160mm" rather than "infinity") on your Sony A, Sony E / FE, Canon EF / EF-S, Canon RF, Canon M, Nikon F, Nikon Z, Fujifilm X,…
When the 4x microscope objective available from “Reakway” is mounted 150mm away from a camera's sensor, it works wonderfully for photography, covering a full-frame image sensor with a nice sharp image. You can find my standard…
Note. You have to salvage a lens from a disposable camera. The one I used is from a Kodak fun saver Update v.1.2: Added a knob to lock the focus and adjusted some dimensions. Find a small screw, glue it to the knob and drill out the hole…
Hotshoe cover with Fuji X logo. Measured and tested on my X-T20, but should fit practically any hotshoe on any camera.
Design for supportless printing, had tried on XF35mmf1.4, XF56mmf1.2 and XF90mmf2.
I've tested it on Fujifilm X100T and X100F, but it should work with X100, X100S, and X100V too. It has a snug fit so it won't need a screw to stay in place like the ones you can buy do.
Lost the body cap for my fuji x camera, remixed file to recreate the same. Should be comparable to Fujifilm's Camera Body Lens Cap BCP-001 Printed with a 0.6mm nozzle at 0.2mm layer height with support cubic infill for ~35min print time.…
This is a modified version of the "Instax Photo Frame" by o0aaron0o, you can display 3 photos instead of one. Note: It was printed using Cura 4.4.0 with raft and tree supports only. Category: Decor
I created a stand version from my Christmas tree hanging photo frame found here. Reference: https://www.prusaprinters.org/prints/93150-instax-mini-photo-frame-tree-ornament Add the photo and place wherever you like. Update: 06/06/2022…
The 3D model of the highest mountain in Japan - Mount Fuji . With a summit elevation of 3,776 m (12,388 ft) is the second-highest volcano located on an island in Asia. The model was precisely modeled from digital elevation data. The…
This is a wall mount for the Fujitsu Esprimo Q920 mini PC (USFF). It consists of a base and an optional mirrored top part; the base is working fine without it, but I felt more comfortable also adding the top. Make sure that the vent holes…
This is a new model of my previous Fujifilm X rear lens cap. There are two versions, both print in roughly an hour. two walls, like the original, somewhat flexible, and solid body Recommended print settings: PETG filament, 0.2 mm layer…
I couldn't find any frames for the Instax Square Instant Photos so i modified the "Instax Photo Frame" by o0aaron0o Note: It was printed using Cura 4.4.0 with raft and tree supports only. Category: Decor
Various designs for a HotShoe-Cover suitable for Fujifilm cameras. I have taken the dimensions on my X-T4.
4 color image Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Pitch Black At layer #7 (0.64mm) swap to Red At layer #12 (1.04mm) swap to Pure Yellow At layer #15 (1.28mm) swap…
I tried many of the thumbgrips I found online, but I didn't like any of them so I made my own. I took the best of all designs I tried and combined it into one design to rule them all. You might need to sand it down a little for a smooth…
LEICA style lens hood for fujifilm XF23 f2
The Fuji X-T10, X-T20 and X-T30 are great little cameras, but the grip is a bit small for larger hands: your pinkie has no-where to go except under the camera. This newly updated grip provides full support for all of your fingers, yet…
Case for fujifilm NP-W126 and NP-W126S batteries. Optimal wall thickness for the most minimalist design possible. Original and non-original NP-W126 / S batteries fit into the case. Recommended PRINT SETTINGS: layer heigh: 0.13 - 0.18…
**Print Instructions** Supports: No Resolution: 0.15mm or 0.20mm Infill: 10% Printed with MMU2s. But you can print it also in single pieces and glue it together or without the “X”.
This is a remix based on a hot shoe thumb grip for the Fujifilm X-A7. Following changes have been made: adapted to the Fujifilm X-E4 resized the part that slides into the hot shoe for a snug fit shortened the grip length
Remixed from VZPHOTOs Fuji X100V Thumbgrip. For XT20, I needed it to be a little longer so here it is.
Reverse engineered JJC TA-XPRO3 grip, not the exact same dimensions but very similar. If someone needs a more FDM friendly version, just write me.
I adapted the Diameter of the Adapter as well as the Flange to fit Fuji X-Mount Camera. Please visit @volzotan_217694 original Design for detailed instructions. Use the Fusion File to adapt the focal length. The Images I uploaded are jpgs…
🇯🇵 富士山へようこそ! 🏔Welcome to Mt. Fuji! Mt. Fuji is an active stratovolcano (a volcano so tall that it reaches the stratosphere) located on the Japanese island of Honshu, with a summit elevation of 3,776.24 m (12,389 ft 3 in). It is the…
Lens cap for fujifilm G (GFX) system based on the original cap. No supports needed. I use PETG with 0.4 nozzle 0.2 layer but PLA should also works. I also printed this on resin printer and also fits great.
3.5" HDD rail designed for Fujitsu Esprimo P-series computers. If you want to use it to slide your HDD, you'll need to print 2 pieces of this model. Bracket is designed in a way that you can use standard screws for HDD to mount it. It…
Fujifilm Instax Wide Photo Frame I couldn't find any frames for the Instax Wide Instant Photos so i modified the "Instax Photo Frame" by o0aaron0o Note: It was printed using Cura 4.4.0 with raft and tree supports only.
WORK IN PROGRESS: I am still finetuning this design. PK-FX#2v10 is final… for now. I made an adapter to use my old Pentax 50mm lens on my brandnew Fujifilm X-S20. The lens will be fully manual of course, just like in the old days…. ;-)…
Eyepiece or Eyecup that fits Fujifilm X-T4 X-T3 X-T2 X-T1 XT4 XT3 XT2 XT1 X-H1 XH1 GFX100 GFX 50S Models. I made this design for my Fujifilm X-T1 but it should fit all the models listed above. It was printed with a 0.1 layer height on a…
Fujitsu Futro S920 is often sell with a 2/4GB mSATA SSD. For many usage it's not enough. To avoid spending too much money on a new mSATA SSD, I designed a 2,5" drive holder to be able to reuse an old SSD that I already had. How to install…
Mounts m42 lenses or helicoids to Fujifilm mirrorless cameras. Note that this is primarily for adapting projector lenses with a focusing helicoid. So, the flange distance is a lot thinner than normal. A conventional m42 lens will not have…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
I don't know if it works with other models. Will probably need some sanding after printing in order to fit. Can also be printed in other materials. The one you see in the photo is -sanded with 180 and 400 grit -primed -sprayed black
Hotswap 2.5" HDD/SSD caddy for old Fujitsu Primergy servers. Fits as a replacement for A3C40058356, see compatibility section for servers. Fits drives up to 12.5mm, however airflow might be an issue. You can use the metal piece from blank…
Perfect and secure fit. Correct focal length. Easy to print. Supports are only needed for "Canon side" clips. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.2 Infill: 25% Filament:…
Very snug fit HDD bracket for Fujitsu Futro S920. Fixed with 2xM3 screws to the Futro. Vertical printed without any supports (as in the 3mf file) 2,5" HDD with 9,5mm height fits inside. HDD can be fixed with 2xM3 screws too.
Ultra-compact 9mm tall rear lens cap for Fujinon X mount lenses. Standard Fujinon cap is 13.5mm tall, I like more compact Voigtlander cap design for Fuji X lenses. At some point I realized that most Fuji X lenses I have do not protrude…
Print worked perfectly with PETG, 0,1mm setting. Infill doesn't matter.
Just bought a few Fujitsu Servers, trying to develop a ssd tray for the 2,5" bays since mine somehow did not get shipped with them, and worst i could not find them online to insert any other ssd drive to them. with Version 5 everything…
I saw a YouTube video of people using the lens from a disposable camera and combining it with their camera body cap to make a new lens. I decided to 3D print one instead. After four iterations, I got the right thickness to work with the…
Square style lens hood and cap for the Fujifilm 35mm F2 WR lens. Example was printed on a Bambu Lab A1 using eSUN Upgraded Matte PLA Filament with a 0.4mm nozzle and a layer height of 0.2mm. The model can be printed without the use of…
COMPRAR ILUMINACION AQUI: https://s.click.aliexpress.com/e/_DE4xxNH DESDE AMAZON AQUI: https://amzn.to/3Pb4ToJ ARCHIVOS SVG PDF Y OTROS FORMATOS DISPONIBLES EN MI PATREON: https://www.patreon.com/tecnoculebras VIDEOS EJEMPLOS MONTAJE…
This is a dummy model to design your own Fuji accessories from.
A Box for films and instantpics for Fujifilm Mini V2: tighter pressfit
UPDATE: V1.1 has improved pin shape for easier mounting. I used PETG for printing because some flexibility is needed to make the little arm snap into the Kensington lock hole. 3 perimeters worked well. If you try PLA, please let me know.…
The Fuji X-T3 is a great little camera, but lacks an Arca-Swiss mounting plate. Also, the grip is a tad small, would benefit from a bit more beef. This newly designed grip provides both features, yet doesn't block access to any of the…
Update 20230603: New model available: https://www.printables.com/model/497503-new-fuji-x-rear-lens-cap
3D terrain model of the Japanese volcano Fuji I really like terrain models, I prepared one for you Mount Fuji i s an active stratovolcano located on the Japanese island of Honshu , with a summit elevation of 3,776.24 m I recommend…
This is a remix for the larger NP-W235 batteries used on cameras like the FujiFilm XT-4 and later. The holder can house 3 batteries. Ideal layer height is 0.2mm - you can choose to print the logo in a different colour should you choose,…
Japanese JDM Tsurikawa that resembles Fuji mountain. Prepare with 3D printing in mind, but it can also be used in mould preparation. To achieve colour, it can be spray-painted or printed with a multicolour printer. Mostly used for car…
Quick modification of the Futro S740 19 inch mount by @d3n1zg for a 10 inch rack. Use two M2.5x6 flat head screws for fixing the Futro to the mount.
Bill of Materials: 1x M3x4mm countersunk screw 1x M3 nut Instructions: Insert the M3 nut into the designated slot on the thumbs grip. Align the hot shoe mount with the thumbs grip and secure it using the M3x4mm countersunk screw. Ensure…
After seeing the great upload from This Noise I remixed this into one piece and made it a bit thicker. A simple colour swap is all that is needed. No special printing parameters but I did turn ironing on.
This square lens hood for the XF 27mm f/2.8 lens is designed for two-part printing. Print the threaded base and the hood separately. Screw the threaded base into the hood to your preferred depth and secure it with glue. Leave about 2mm of…
These files are for Personal Use Only . If you would like a Commercial License to sell prints made from these designs, please join me on Patreon : https://www.patreon.com/kazitoad This is designed with spring loaded retention clips and…
This model of Mt Fuji was created for a friend who recently climbed the real deal. It started with data from https://terrain.party/ , which was then imported into blender, then finally modified in Fusion360. A compass rose is relieved on…
You may need to adjust the scale for a perfect fit I printed 4 versions (100% 100.5% 101% 101.5%) to find the best fit at 101% for my 35mm lens Printing suggestions: 6 wall loops Variable layer height / smooth layers Automatic bridging…
This is a simple adapter to allow you to attach your Fujifilm mirrorless camera directly to your telescope with a 1.25" eyepiece. Printing it slower to ensure accuracy is probably best. The locking pin does work. It's a snug fit and so…
This is a negative carrier for Fujimoto G70 and V70. Several variants, depending on negative format, are available. The negative carrier can also be used on a light table if you want to digitalise the negatives. NOTE: The files DIYa and…
my own designed fujifilm xm5 handgrip, you can use ¼" for the 3 thread inserts
Description A 19-inch, 2-piece, modular rackmount for a Fujitsu Futro S740. This mount is part of a 19-inch modular rackmount system designed by @Mauker , you can mix and match the modules with other mounts. Take a look at his models here…
We recommend you to print with PLA/ABS/Nylon
Protective cover for the Fujifilm battery NP-W235, the battery for the X-T4
I have lost the camera's back thumb rest molding due to the adhesive given out, so I designed one that fits perfectly when printed with my calibrated 3D printer and retains the original's aesthetics. Even with non-calibrated printers I…
2.5'' SSD/HDD insert for serves like the Fujitsu Primergy rx2540
Simple bracket for hanging a FUJITSU FUTRO S940 thin client on the wall. Additionally, only 3x 4mm at least 50mm long countersunk screws and corresponding dowels are required. Ensure alignment on the print bed so that the upper hook can…
Caddy designt for the Fujitsu Server RX1330 M1. (Maybe it can also be used on newer generations) The caddy is designt for transparent filaments, you can see the HDD status LED on the front. INFO: 2.5" caddy needs support! ...the 3.5"…
Assembly tutorial by original author : Two versions of the lever, one fully 3d printed and second that uses M2x5mm (or longer cut to size) screw as a locking pin, it may scratch your lenses but is stronger and more reliable. To secure the…
Designed this thumb grip for the Fujifilm X-E2 to sit in the hot shoe and forms around the wheel on the top. Printed upside down with some supports
Use 5 screws of m2.5 or m2.6 16mm. Added I also added an adapter for Sony E mount. I haven't tried this, so please let me know if there is a problem with the position of the lock pin. Click here for the adapter.…
TinyMtn Free Pack 15 - Ring of Fire This is a package with sets of 3D model files for four symmetric volcanic cones on the Ring of Fire. Mount Agung, 3031 m / 9944 ft Mt. Fuji, 3776 m / 12,388 ft Kronotskaya Sopka, 3528 m / 11,575 ft…
The Fuji FUJINON XF16-80mmF4 R OIS WR lens is a well regarded “kit” lens, known for being sharp and versatile. It normally comes with nice hood, but this often gets lost or damaged. I searched everywhere for a replacement and, other than…
I didn't have any native lens for my Fuji GFX when I bought it. But I had this cursed soviet Zeiss Ultron copy, which used M42. I had nothing better to do but tinker and try to adapt it. It works, but beware that image render circle gets…
Some spare HDD mounting rails compatible with Q510, Q520, Q910 and Q920 of the Fujitsu ESPRIMO Q-Series which are commonly available here or here . Spare part number: C26361-K1011-C40-*-Y369 Print without support in PETG or ASA at 0.2mm…
Square hood for fuji 23mm f2. It's designed to fit snugly on the original hood mount.
This a Model of Mount Fuji in Low Poly as decorative piece. I like the layers as an additional elevation showing.
Hi! I didn't find some nice easy to print simple picture frame for Fujifilm instax mini so i draw 5 models. Really easy to print. You can print the 5 frame on a MK3S in one print with no skirt. Their hole in the back to hang them on some…
Prints in place without supports. Fits around 25 films.
i bought the Fujutsi futro S740 cheap as a home server for smart home stuff. due to it was used i got no stand with it. here are 2 options for that for every stand you need part A and part B i printed that in ABS on my Voron
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm…
Eine Wandhalterung für einen Fujitsu Futro S740 inkl . Fixierung. Materialliste: 3x Dübel Fischer DuoPower 6 x 30 S https://amzn.to/3B8n8rg 3x SPAX Universalschraube, 4,5 x 30 mm https://amzn.to/3TCtTb8 --- A wall mount for a Fujitsu…
Materiał: PLA, ABS, PET-G Podpory: Tak Uwaga: Zamontuj w pierwszej kolejności dyski twarde za pomocą śrub stożkowych M3-6mm. Dla dwóch tylnych śrub M3-10/12mm potrzeba delikatnie rozgiąć kratkę, można zastosować śruby M2,5 (bez rozginania)
Summary --- This is a 3D printable body for the plastic lens element from a FujiFilm QuickSnap disposable underwater camera. The Fuji website claims this to be a 32mm lens, which comes to 64mm equivalent on M4/3, from what I understand. I…
Fuji X100V / X100VI camera filter adapter 49mm - angular version II Model is designed from scratch using BoltFactory Blender plugin. Adapter outer walls are tilted to the same angle the stock lens has, so it better fits overall style of…
MORE INFORMATION : https://leonardoramazzotti.github.io/leonardo_ramazzotti_links/fuji.html <div class="article">
UPDATE [2024-04-26] : Designed improved adapter angular version II 49mm adapter ring for Fujifilm X100 series cameras. UPDATE 01-02-2024: Added V2 with more smooth walls. Remixed the source adapter by doubling its 49mm thread to other…
Feets for the Fujitsu Futro s740 thin client computer. Just use them in place of the original ones FreeCad files are added, so you are free to midify it to your needs. The repair connector is used in case the original studs are broken…
I design and made this for out door instax shots. For close up shots where the flash just over power the shot. Can be use for flash block or diffusing. You will need double side tape or velcro to secure to the camera. for diffuser i use…
Introducing the Universal Instant Photo Album, designed for a wide range of instant film types including Polaroid 600, Fuji Instax Square, Fuji Instax Wide, and Fuji Instax Mini. This album offers a practical and straightforward way to…
Untested - 18mm pinhole lens for fuji x-mount
An allways mounted cooling tray for Fujikura 70S fusion splicer. Splicer do fit in transport box with the tray mounted.
Works for Fujitsu Primergy TX1320 M3. Tool-less installation of 2.5" drives. My print settings: 0.6 Nozzle 0.25 mm Layerheight Fill pattern: Rectilinear Fill density: 50% Brim type: Outer brim only Brim width: 2 mm The Model:…
I got a fujifilm instax mini 11 as a christmas gift. The buttons included with the camera did not stick on the double sided tape they came with, so I fired up Fusion360 and after 30min of modeling and 10min of printing I got this. Because…
In the run up for World Pinhole Day at the end of April I was asked by a friend if I could print a pinhole body cap for them. I searched for a 3D model to modify but none were freely available. I took it upon myself to take measurements…
The Fuji X-H2 and H2S are great cameras. This new grip expansion provides full support for rapid mount Arca-Swiss tripods, yet doesn't block access to any camera features, such as battery, display etc. In case you DO want to use a…
I decided to publish it because I saw that it fall off often on this camera model. I printed it in PLA and stuck it using double sided tape, but i assume you can use flexible filament.
