1 / 3
Fujitsu Futro S720 S920 HDD / SDD 2,5" mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fujitsu Futro S920 is often sell with a 2/4GB mSATA SSD. For many usage it's not enough and you should need a 2,5" SSD
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 380
- Makes
- 1
- Views
- 9,343
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
Fujitsu Futro S920 is often sell with a 2/4GB mSATA SSD. For many usage it's not enough.
To avoid spending too much money on a new mSATA SSD, I designed a 2,5" drive holder to be able to reuse an old SSD that I already had.
How to install
- unscrew the metal holder where the card reader & speaker are screwed from the housing

- remove the card reader, the speaker & the hexagonal spacers from the metal holder

- screw the printed 2,5" SSD mount to the metal holder

- screw the SSD to the printed 2,5" mount



- install the metal holder in the housing and screw it with 2 opposite screws
Pay attention to the foolproof notches when you reinstall the support in the box. Specially the one on the front side.

- I didn't received the PCIe riser yet but it should stay compatible with a PCIe card, even with a 15mm HDD

Category: Parts