1 / 3
Fujitsu Futro S720 S920 HDD / SDD 2,5" mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fujitsu Futro S920 is often sell with a 2/4GB mSATA SSD. For many usage it's not enough and you should need a 2,5" SSD
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 380
- Wydruki
- 1
- Wyświetlenia
- 9343
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (1)Kolekcje (23)Powiązane
Fujitsu Futro S920 is often sell with a 2/4GB mSATA SSD. For many usage it's not enough.
To avoid spending too much money on a new mSATA SSD, I designed a 2,5" drive holder to be able to reuse an old SSD that I already had.
How to install
- unscrew the metal holder where the card reader & speaker are screwed from the housing

- remove the card reader, the speaker & the hexagonal spacers from the metal holder

- screw the printed 2,5" SSD mount to the metal holder

- screw the SSD to the printed 2,5" mount



- install the metal holder in the housing and screw it with 2 opposite screws
Pay attention to the foolproof notches when you reinstall the support in the box. Specially the one on the front side.

- I didn't received the PCIe riser yet but it should stay compatible with a PCIe card, even with a 15mm HDD

Category: Parts