Stedi Scribe Storage Insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An insert to hold up to 4 additional scribe blade sizes in the body of the handle.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 106
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This is an insert I made to hold additional scribe blades for the Stedi scribe handle and those similar. It is sized to print in ASA, so you may need to size a bit if printing a different material. It is designed so the blades should not fall directly out into your hand if you forget about how sharp they are and try to shake them out (the circular guard is there to stop them). Despite this, by downloading this model, you alone assume all liability in case of injury.
Print sideways on the build plate as pictured with supports on the build plate only. I printed with an 0.6 nozzle and it took approximately 13 minutes on my Trizero.