1 / 7
Ayrton Senna's Williams FW16: F1/Formula 1 Car Model Kit — zdjęcie 1
1 / 7

Ayrton Senna's Williams FW16: F1/Formula 1 Car Model Kit

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The 1994 Constructor's Champion F1 car, driven by Ayrton Senna, Damon Hill, Nigel Mansell, and David Coulthard

Ocena
5 / 5
Polubienia
336
Pobrania
2005
Wydruki
1
Wyświetlenia
10 475
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

For FDM - use the separated floor variant. I recommend 4% scale. 

This is an all-original model I designed specifically for 3D printing.

I've tried to keep the assembly as simple as possible. 

There's an additional folder containing the rear wing elements if you want to take advantage of flat slicing.

The early/Senna variant has the swept-side-pods.

The later/Hill variant has flatter/further rearward intakes + bargeboards.

--

Sept ’25 - added some slightly thicker suspension components + nose with thicker lower wing + endplates, and tub with a thicker floor. These parts should now be printable down to 2% of the stock STL size.

Oct '25 - added version with the protruding/side camera wing as a separate component. 

Dec '25 - Updated chassis with improved sidepod intakes, separate rear suspension and transmission for easier printing. Moved old parts to different folder. 

May '26 - added merged tub/cowling chassis variant.

Added bargeboards for later variant.

Added screenshots showing rear suspension orientation. 

Added drilled brake disks 

Tagi