Liczymy pasujące modele…
A small combine I made for my Dragonwood & Pacific railroad, loosely based on the (albeit narrow gauge) combines used by the United Verde. While it's freelanced, it's probably as realistic as it gets. I read way too many primary documents…
This is the 1 din stereo mounting bracket for the 90s GM vehicles. I made this for my 1996 Impala SS. The radio sits flush as shown in the pictures, and its centered using to the dash bezel. I guess the bracket fits the S10 pickup truck…
Mg90d servo https://share.google/E6KvHXBPQiiqf0F3B Laser pointer https://share.google/aNgYr9M2GAukybvdS The laser must be supported by paper so that it holds and does not fall out. both servos can rotate 270 degrees
An ultra realistic and almost exact clone of Lenovo Thinkpad T490s.
servo actuated arm to pull the lever and cut the filament - designed for the dragon burner
A fully-custom 1:24 scale vending machine with a fictional soda brand. Design files are included in the Other Files section, but more info is available here . In short, all the graphic design is public domain, as is the model. The…
Printed beautifully with default settings in Orca Slicer. You can add ironing to the top layers as well for a nice, smooth finish to the lettering.
I've seen a lot of people toying with these touchscreen Guition 4" screens lately, so I picked a couple up to mess around with. The screen by itself was a little boring, so I decided to do what any normal, well-adjusted human would do and…
I've used this blank as a mounting point for buttons, indicator lights, smaller switches etc. for my D21, S13 and C34. It's modeled on the ones that were in the dash of my S13, and seems to fit a bunch of Nissans from that era. Just use…
This was made to replace the air vent in my uncle's Mitsubishi Canter. There are two model options: A standard option with normal air vents. A version with text on it that says "mother trucker" My version was printed with black PLA on an…
Remixed Rear Wing by StreelyDan for the Haiboxing 16890a to have appropriate geometry for attaching this wing to the Haiboxing 16890a chassis.
An automatic trash can that supports an ultrasonic sensor and a space for a mg90s servo.
It is built around a 12x10mm carbon fiber tube and 17x28x7mm bearing (17287RS). test:
Pomôcka pre zváračku optických vlákien Fujikura 90S+ pritlači som použil PLA 100% výplň.
A fully functional 90s coca-cola yoyo replica. Requires a M3x20mm bolt and nut. The 2 bases (white coloured parts) require VERY minimal support to print the inside. Assembly instructions video: Assembly instructions text: Use the "screw…
Immerse yourself in the world of automotive elegance with the Mercedes 190SL wheel, a perfect harmony of timeless style and unparalleled performance. This wheel embodies the excellence of Mercedes craftsmanship, combining quality…
A custom pulley designed for my finger-servo project! This is a modified GT2 6mm, 20-tooth pulley that perfectly fits the MG90s servo. I printed it using PLA with a standard 0.4mm nozzle and a layer height of 0.2mm, with a slower print…
All the credits goes to https://www.thingiverse.com/thing:3050358 But the original does not fit TowerPro MG90S 180deg metal servo i have. Slight changes were needed here and there, now it's complete and everything fits well. Including…
Small, elegant stand to use your laptop as a screen (with mouse and keyboard setup), to unclutter the desk and raise the screen to a proper level. Easy print, no supports, only 25 grams of filament. Stands stably with no flex. If you have…
Print with 3 walls. No brim required usually. f360 file included.
Mounts are currently setup for a passenger seat, Driver side would require mirroring the rear outboard part. Will need to mirror the front mount as well, or don't. Mounts are pretty basic, 8mm bolts thread directly into the plastic, was…
There are a lot of MG90S servos on AliExpress, but not all are the same. Ive disassembled one with these specific gears (marked in the picture), measured it, and recreated it in CAD.
Wall mount for Mossberg 590S models with a factory installed short shell bumper. Added hole at bottom of mount body to facilitate a way to attach a trigger guard. Trigger guard releases when 590S is pulled from mount. I went for large…
A slight remix of a great design. The original perfectly fits the nylon gear version of the Tower Hobbies (and clones) 9g servo. However, the MG90S, metal gear, version is slightly taller and required a modification. This design allows…
Réparation de la cloche de chasse d'eau GEBERIT des années 90. Repair of the GEBERIT flush bell from the 90s.
precise replica of the arm that came with my MG90S Servo Higher resolution / more detailed / fixed / easier to print version also available (improved versions)
A small combine I made for my Dragonwood & Pacific railroad, loosely based on the (albeit narrow gauge) combines used by the United Verde. While it's freelanced, it's probably as realistic as it gets. I read way too many primary documents…
My son in law has a 95 Del Sol (NICE) in taking the door panels off he broke some of these guys, so modeled one up in tinkercad and works well.
Here Are you seeing , an Gantry Servo Depressor for the Filametrix or the FilamAtrix. This Servo Depressor works with the normal Filametrix or FilamAtrix (CW2 and G2E) Material are needed: 1 x M3 Heatnut 1 x M3 4x3x5 Heatinsert (short…
Step back into the underground rave scene of the early '90s with this bold, high-energy keychain design. "NIGHT LIFE" is rendered in a stylized, retro-techno font with sharp contours, speedlines, and geometric accents — just like a…
Welcome to the club where redline is a lifestyle. This VTEC Club keychain is a tribute to the golden age of street racing and the legendary high-revving VTEC engines that defined a generation. Inspired by 1990s racing aesthetics, this…
This keychain is pure 90s JDM energy — turbocharged and touge-ready. Inspired by the legendary Nissan Silvia and Skyline GT-R era, this keychain design captures the golden age of Japanese street racing. Featuring bold shapes, retro fonts,…
Door trim panel clips should it W201 W124 R129 W126 W123 W202 Designed for a W201, chatgpt tells me it will fit the other models. Modelled of an original clip, fully functional and working great. Print in PETG for heat resistance in…
Replacement kerf insert for Scheppach HM90SL miter saw (Printed in PLA + ironing topmost surfaces)
This is the 1 din stereo mounting bracket for the 90s GM vehicles. I made this for my 1996 Impala SS. The radio sits flush as shown in the pictures, and its centered using to the dash bezel. I guess the bracket fits the S10 pickup truck…
SG90S servo like you get on Aliexpress or Banggood with accurate dimensions. Use as a consruction aid for modeling. Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament:…
Funko pop del músico, cantante, compositor y productor de discos británico, líder y letrista principal de Blur
Please click if you appreciate my work :) A dark knight’s ride. The Gotham Batmobile – now on your wall. This 3D printable wall-mounted model of the 1990 Batmobile , inspired by Tim Burton’s “Batman” and “Batman Returns”, is a must-have…
Use file servo-to-print. Web-cam-servo is for reference to see how to mount your servos. I can also share the pi case, but it's pretty basic.
Mounts a noctua 120mm fan to OEM minisforum 790S7 cpu cooler. Uses OEM screws to mount internal 4 holes to cpu cooler and M4 screws to mount fan OEM panel will also fit if foam seal is removed.
Capture the essence of a classic with this simplified outline of the iconic 1990s Porsche 911. This ultra-minimalist 3D printable model features only the clean outer lines of the car’s profile, offering a sleek and stylish take on the…
Hockey pucks of 1990s Washington Capitals logo. Logo protruding, another in engraved style. Side knurled pattern versions also available. Enjoy! Check out other pucks in my collection:…
Hockey pucks of 1990s Vancouver Canucks logo. Logo protruding, another in engraved style. Side knurled pattern versions also available. Enjoy! Check out other pucks in my collection:…
Hockey pucks of 1990s Pittsburgh Penguins Logo protruding, another in engraved style. Side knurled pattern versions also available. Enjoy! Check out other pucks in my collection: https://www.printables.com/@m_collectable/collections/2703845
Hockey pucks of Gretzky era 1990s Los Angeles Kings. Logo protruding, another in engraved style. Side knurled pattern versions also available. Enjoy! Check out other pucks in my collection:…
Hockey pucks of Winnipeg Jets with 1990s logo. Logo protruding, another in engraved style. Side knurled pattern versions also available. Enjoy! Check out other pucks in my collection:…
Alternate servo mount & belt gear for MG90s servo. This servo seems to be more readily available and is quite compatible with EBB42 board given the current and voltage ratings.
Custom request for @NLmasteross_3524273 Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license: Patreon Portfolio at https://marjers.com/ Tools I use: Acrylic paint pens…
Mg90d servo https://share.google/E6KvHXBPQiiqf0F3B Laser pointer https://share.google/aNgYr9M2GAukybvdS The laser must be supported by paper so that it holds and does not fall out. both servos can rotate 270 degrees
I bought a project bike that was missing this piece, so I remade it as close to the original as I reasonably could. It bolts on just like the original. I printed it with clear petg with at least 4 walls and 20% cubic infill. It held up…
This is a custom-designed servo horn made specifically for the MG90S micro servo . It’s intended for projects that require 2 mm-diameter connections , such as lightweight linkages, control arms, or small mechanical assemblies. Although I…
Adapt https://amzn.to/4pk0QHj Toyota Tacoma sun visors to GM. Recommend ASA or ASA-CF. Paint as desired.
MG90S Form Factor This model is designed to match the form factor of the MG90S servo for easy compatibility with standard mounts and RC projects. Details: Width: 12 mm Length: 32.3 mm Height: 28.2 mm Notes: Measurements taken at the…
An ultra realistic and almost exact clone of Lenovo Thinkpad T490s.
This is a simple mount to attach a 250V 12A softstart modul KR-009 or the 16A ZLB to a Scheppach mitre saw HM90SL without making any permanent changes to the saw. Just unscrew one screw that holds the bladecover, add the mount and…
This is a simple but effective 3mm thick spacer designed to increase the thickness of standard 2.5" SSDs so they fit more securely in Icy-Dock EZ-Fit Lite MB290SP-B drive trays. Problem it solves: The Icy-Dock MB290SP-B tray is designed…
servo actuated arm to pull the lever and cut the filament - designed for the dragon burner
A fully-custom 1:24 scale vending machine with a fictional soda brand. Design files are included in the Other Files section, but more info is available here . In short, all the graphic design is public domain, as is the model. The…
Printed beautifully with default settings in Orca Slicer. You can add ironing to the top layers as well for a nice, smooth finish to the lettering.
Models of the angle gauge holder TLL-90S for mounting on the rod of the abrasive holder. ForTLL90S-Big.stl for installing TLL-90S horizontally. It is possible to turn the holder 90 degrees. It is also possible to install the TLL-90S…
I've seen a lot of people toying with these touchscreen Guition 4" screens lately, so I picked a couple up to mess around with. The screen by itself was a little boring, so I decided to do what any normal, well-adjusted human would do and…
I've used this blank as a mounting point for buttons, indicator lights, smaller switches etc. for my D21, S13 and C34. It's modeled on the ones that were in the dash of my S13, and seems to fit a bunch of Nissans from that era. Just use…
This was made to replace the air vent in my uncle's Mitsubishi Canter. There are two model options: A standard option with normal air vents. A version with text on it that says "mother trucker" My version was printed with black PLA on an…
2 versions of the clip, one for use with the windshield trim in place, the other without. This is for our Recce car, so no trim. Printed in 64d TPU, but would likely be fine in Petg or similar. I haven't been able to test with trim, so…
Model uses M5 screws to hold it together and is spec'd for Miuzei MG90S servo's.
Remixed Rear Wing by StreelyDan for the Haiboxing 16890a to have appropriate geometry for attaching this wing to the Haiboxing 16890a chassis.
Plumber binned the wall mount for my Vovo TCB-090SA controller as he was too excited to see a toilet squirt water, so had to make this.
An automatic trash can that supports an ultrasonic sensor and a space for a mg90s servo.
It is built around a 12x10mm carbon fiber tube and 17x28x7mm bearing (17287RS). test:
90s JDM Energy: The Ultimate Street-Racing Keychain This design is a tribute to the golden age of Japanese street racing, capturing the raw spirit of the legendary Nissan Silvia and Skyline GT-R era. Design Aesthetics: Bold retro fonts…
Laser Auto Tracking Turret (CIWS Style) This project is a study prototype inspired by naval Close-In Weapon Systems (CIWS) . Instead of real weapons, it uses a laser pointer mounted on a turret that can automatically detect and track…
This is Lara Croft from Tomb Raider older games. Please feel free to remix this, there are some flaws in the design. You must use supports to print this figure, it's not easy to remove, specially in the pistols. Hope you like.
The tool is fairly self explanatory, slide the guide over the pin and use your sidecutters to trim the pin to length. The insert pin guide works for both AOI actives and Milenium passives!
Adapter plate to use micro-servo MG90S in place of an MG995 or equivalent, a simple piece designed to aid the use of smaller micro-servos in place of their larger cousins. This was made to compliment, and allow the use of micro servos, in…
Overview Bring an authentic, premium automotive aesthetic to your DIY dashboard simulator. This needle design is modeled 1:1 after the classic VW Phaeton gauge cluster and is custom-fit for the popular MG90 and MG90S micro servos. Design…
Bring your favorite designs to life with this high-quality 3D printable LED Light Box STL from GIVEMHEVN This layered light box is designed to create a clean, professional display when illuminated using an LED light source. The…
Cargo cover trim panel piece from 98 jeep cherokee. I scanned the right side that was still good, made him a pair. I did however have to drill out the holes since I didn't model over it and clean them up. If I had a nicer scanner it…
Demo of how such shutter operates with added rubber band: https://www.instagram.com/reels/DTndZO5guC0/ I used Gemini prompt shared in the youtube video "High-quality 3D render of a Lancaster rotational photographic shutter for old vintage…
This is a claw for the MG90s and MG90D mini servos. For extra grip or to secure the holder, wrap a rubber band around the gripper. 4 walls 15% infill 210F
Quick bitmap model of this image of an IRA Sniper At Work Sign: https://cdn11.bigcommerce.com/s-ay2hlecgqg/images/stencil/1280x1280/products/1001/580/photo_2024-04-22_23-43-19__76972.1748613366.jpg?c=1 These signs taunted British troops,…
MG90S Servo Mount designed for custom robotics and animatronics projects. This is a single servo holder perfect for robot heads, arms, or other mechanisms using the popular MG90S metal gear servo (commonly paired with ESP32 boards). M2…
The rear cover/brush holder for the motor on my Delta table saw was damaged and I really needed to replace it to make the saw safe again. Now you can too! Print Settings Printer Brand: Ultimaker Printer: Ultimaker 3 Rafts: No Supports:…
The XT90-shaped hole in the original was off center. This one is not. Category: DIY
Goal: a new high current loop key design that is: easily 3D printable captured / self-contained / no losing keys or carrying another fob compact & small footprint secure mounting locks out when powered down slick looking reliable Specs:…
This is the Starfleet Insignia of the 2390s in Star Trek as seen in Star Trek: Picard, Voyager (slightly different there) and several others. I couldn't find a fitting model to print online, so I just created one. Creation I firstly…
This is a remix of marcotheboy's design, original is on Thingiverse https://www.thingiverse.com/thing:2724542 The original version can't be used with a MG90S servo : there is not enough space when the car is fully mounted for the servo…
Just a small angle for 20x20 aluminum profile. Pasuje na : https://www.printables.com/cs/model/276705-spojka-20x20-90-l
Note: Build photos coming soon! This replica of the Starfleet Combadge from Star Trek: Picard is the perfect addition to any cosplay armada or combadge collection. This combadge is notable for following the trend of Discovery having…
Based on "Parametric laptop holder/stand" by realrenshai on Thingiverse. Modified to add a holder for the docking station and holes so that I can still access the docking station power button. If you are going to modify the scad model…
As I want to run my Tamtech 1/24th Ferrari Testarossa, I have removed all the stock electronics and am replacing them with updated kit. The servo I chose to replace the stock version from the '80's was a Turnigy MG90S - cheap, easily…
I was tired of spilling the oil all over my valve cover, thus this oil funnel. It threads into the valve cover. It works quite well. For fun I modeled a straw into the funnel to allow for fast flling.
New design for the MG90S servo motor. Simple construction. Shuts off flow Screw the horn onto the servo and then attach the servo to the housing, insert 4mm outer diameter tubing through the hole and out to the other side. Printed in PLA…
![XT-90s Loop Panel Mount (Small) [remix]](https://media.printables.com/media/prints/196361/images/1817579_201e6a6a-41e6-4033-b3f5-1c63fc058215/large_display_xt-90-s_panel_mount_sm-fixedstl_196.png)
