MG90S horn 2mm holes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Servo horn for attaching 2mm diameter connections
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 592
- Wydruki
- 0
- Wyświetlenia
- 1266
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
This is a custom-designed servo horn made specifically for the MG90S micro servo.
It’s intended for projects that require 2 mm-diameter connections, such as lightweight linkages, control arms, or small mechanical assemblies.
Although I use it on my own RC plane, I'd advise against using it unless you can afford losing/crashing your model. Printed in PETG for a little flex but ABS/ASA should work fine as well.
Notes
This part has been dimensioned based on the MG90S servo spline and 2 mm mounting features.
Fit may vary slightly depending on printer tolerances—adjust scaling if needed.
Use at your own risk.