1 / 1
OpenRC F1 Front suspension servo saver remix for MG90S
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
OpenRC F1 servo holder including servo saver system. Designed to be used with the Front suspension mod.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 52
- Wydruki
- 1
- Wyświetlenia
- 593
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (19)Powiązane
This is a remix of marcotheboy's design, original is on Thingiverse https://www.thingiverse.com/thing:2724542
The original version can't be used with a MG90S servo : there is not enough space when the car is fully mounted for the servo arm to travel forward. As a result, there is little to no left steering.
This remix remove 2mm of thickness to the model on the servo gear side, allowing a good travel range forward.