1 / 4
Honeycomb support for mg90s servos — zdjęcie 1
1 / 4

Honeycomb support for mg90s servos

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

added support for servos to honeycomb attachments and connectors

Ocena
0 / 5
Polubienia
0
Pobrania
16
Wydruki
0
Wyświetlenia
214
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

I am combining an RC platform with a raspberry and a few other parts to have a better mobile platform with an arm and camera. While doing that, i decided to use a honeycomb for the base, and needed a way to support the servos to the honeycomb.

So used the openscan attachments and connectors to build first 3 honeycomb tiles and joined them with a rectangular support for the servos (MG-90S) I needed. its a simple thing, still, leaving this here in case is useful to anyone.

Printed without supports or brim, infil 15%, sturdy enough.

Tagi