1 / 2
U-Joint Bit Holder (Print-in-Place) — zdjęcie 1
1 / 2

U-Joint Bit Holder (Print-in-Place)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple U-Joint Hex-Bit Holder designed for all (3) moveable parts to be printed in place.

Ocena
0 / 5
Polubienia
46
Pobrania
141
Wydruki
0
Wyświetlenia
722
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Print this working ‘U-Joint Assembly’ in PLA using the following settings:

  • 0.10mm - Thickness
  • 15% - Rectilinear Infill
  • 4 - Perimeters
  • Top/Bottom Layers - Concentric
  • Enable - Brim

Tagi