Clancy Hueforge | Twenty One Pilots
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clancy Album Hueforge | Twenty One Pilots |-/
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 43
- Wydruki
- 1
- Wyświetlenia
- 301
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Clancy Hueforge | Twenty One Pilots
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.6mm and the Actual Depth is 2.3mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA Jessie Premium Vanilla Bean Ice Cream Transmission Distance: 2.5
PLA PolyLite White Transmission Distance: 5
This print uses 7 unique filaments
Swap Instructions:
Start with Black
At layer #3 (0.32mm) swap to Yellow
At layer #11 (0.96mm) swap to Red
At layer #16 (1.36mm) swap to Black
At layer #17 (1.44mm) swap to Blue Gray
At layer #21 (1.76mm) swap to Vanilla Bean Ice Cream (Light Gray)
At layer #25 (2.08mm) swap to White for the rest.
… or use the .3mf file ;)
If you're using an AMS with 4 slots replace the following filaments with the new colors as you go:
- swap Yellow with Vanilla Bean Ice Cream (Light Gray)
- swap Red with White