Turbocharger Air Filter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Turbocharge you printer's enclosure or your workspace air filter.
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 747
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
So I had a blower fan lying around and I thought it would be funny if I made a turbo styled air filter for my printer enclosure. So I did.
The fan is a 75mm x 30mm blower fan. I specifically had this one (https://www.amazon.com/dp/B07RP14KML?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2&th=1)
The air filter I am using are those mini air filters found in personal air filters. General Dimensions of ~61mm Diameter & 85mm Tall.
4-pack filter here: (https://www.amazon.com/JORAIR-Replacement-Compatible-Mini-Portable/dp/B09LY8JTMP)
You can also use activated carbon pellets inside of the air filter and there's a disk that stops them from getting inside the fan itself.
The pipe male fitting diameter is 52mm, so go ham and make your own pipes and accessories.
:3
Main Turbo housing:
6x M3 Heat set inserts
6x M3x8mm or M3x6mm Socket Head Bolts
Each Piping Section needs either 2 or 3 M3 Bolts and nuts
I added a bit more room for the fan so that I could add some scrap foam to dampen any extra vibrations from it.
The air filter has a standard-ish Go-Pro mounting system, so hopefully any mount you can find online will work.