Turbocharger Air Filter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Turbocharge you printer's enclosure or your workspace air filter.
- Rating
- 0 / 5
- Likes
- 22
- Downloads
- 51
- Makes
- 0
- Views
- 751
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
So I had a blower fan lying around and I thought it would be funny if I made a turbo styled air filter for my printer enclosure. So I did.
The fan is a 75mm x 30mm blower fan. I specifically had this one (https://www.amazon.com/dp/B07RP14KML?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2&th=1)
The air filter I am using are those mini air filters found in personal air filters. General Dimensions of ~61mm Diameter & 85mm Tall.
4-pack filter here: (https://www.amazon.com/JORAIR-Replacement-Compatible-Mini-Portable/dp/B09LY8JTMP)
You can also use activated carbon pellets inside of the air filter and there's a disk that stops them from getting inside the fan itself.
The pipe male fitting diameter is 52mm, so go ham and make your own pipes and accessories.
:3
Main Turbo housing:
6x M3 Heat set inserts
6x M3x8mm or M3x6mm Socket Head Bolts
Each Piping Section needs either 2 or 3 M3 Bolts and nuts
I added a bit more room for the fan so that I could add some scrap foam to dampen any extra vibrations from it.
The air filter has a standard-ish Go-Pro mounting system, so hopefully any mount you can find online will work.