Sovol SV08 Manta M8P V2 2020 Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of a remix for which I added heat inserts for the board mounting and made the 2020 mount use M3 T-nuts.
- Ocena
- 0 / 5
- Polubienia
- 31
- Pobrania
- 95
- Wydruki
- 0
- Wyświetlenia
- 1217
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This Manta M8P V2 mount should fit the V1 with minor clearancing. I added more material around the mounting locations for M3 heat inserts. I also changed the 2020 mounting to M3 size but that can easily be edited back to the original size if you just delete the additions at the mounting location. This is a .3mf in the proper orientation. Recommend you print this in a heat tolerant material. PLA bends over time and I reprinted it in ASA. Make sure to scale it if you use a material that shrinks like ASA/ABS.
Remixed using Orca Slicer 2.2.0. You need to use this version or newer. May not work in Prusa slicer.
5 walls, 4 top and bottom layers. .2 layer height.