1 / 1
Dragon burner x carriage Eddy coil + Hall effect Y stop — zdjęcie 1

Dragon burner x carriage Eddy coil + Hall effect Y stop

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Allow to use Eddy coil probe and hall effect Y stop

Ocena
0 / 5
Polubienia
5
Pobrania
47
Wydruki
0
Wyświetlenia
585
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

warning, if using Eddy coil, the probe is to close to the hotend. Therefore, the position will show 5 mm when cold and -96 when hot. I need to add an additionnal part to move it to the side. 

But it should work with Eddy USB

 

I used the available x carriage to add support the 6x3 magnet of my Voron 2.4
Print it with the voron usual settings

Tagi