P
Printablesstijn501
Voron Stealthburner BL touch/microprobe adjustable mount
V3.0 is the latest version and more compact due to the 90 degree turn i did with the probe
- Pobrania
- 10
- Polubienia
- 0
- Ocena
- 0
Wyniki wyszukiwania: burner
Liczymy pasujące modele…
P
Printables
Dragon Burner LGX Lite TAP mount
LGX Lite extruder mount for Dragon Burner with TAP adapter.
P
Printables
Stealthburner for a Nitehawk-SB and an LGX
Maturity: Very Good 5 prototypes. In use since 2024/10. A mounting to combine: Stealthburner LGX (not to be mistaken to the unsupported later LGX lite) Nitehawk-SB (and its fan PCB) Umbilical I would call it Casimodo due to its bump. I…
P
Printables
Stealthburner printhead for TZ-E3v2 Hot end
Accidently mis-labeled by afterburner head, and had requests for a stealthburner. Untested as hotend is installed in my afterburner - but has ~1mm clearance requires the V6 collar to be fitted. Nozzle should sit ~3mm below airduct Voron…
P
Printables
Dragonburner Cowl with Klicky Pcb at the front
Remix of the DB cowl with the klicky pcb at the front. I use it in my Trident which has space at the front for the dock.
P
Printables
Stealthburner toolhead mount for Ender 3 v2 Corexy (SRA)
The toolhead mount now has the hole profile for a stealthburner and i also added holes for threaded inserts on the top so I can mount an adxl345 accelerometer
P
Printables
AfterburnerPCB_to_CW2
content 3 pieces 2 washer 1 adapter. U need to cut out a bit from the cw2 enclosure so Ucan plug the connector of the toolhead. No support needed. nozzle 0.4 layer height 0.2
P
Printables
Anet A8 Plus Stealthburner Conversion
Project done in collaboration with @Print3DPilot We wanted to upgrade an Anet A8 Plus to a Stealthburner. We initially thought the Voron Legacy part would be a drop in fit but the distance between linear rod centres were 40mm vs ~50mm on…
P
Printables
E3NG Dragonburner mount (Phucaf rail mod) - extended
The lower section of the original doesnt allow for Klickly/KlickyNG bases to fit behind a mounted Dragonburner. I've extended that section to give more space whilst not going too far back so its still shorter at the bottom than the 20x20…
P
Printables
Stealthburner Bambu Hotend Adapter
I edited @SettlingAbyss_572842's model to make it more printable (fixed the impossible overhang, removed eyebrows and all text, move some geometry a tiny bit to remove thin-ish walls). I also removed the TAP clearance features since I…
P
Printables
Dragon Burner Orbiter 1.5 V6 Remix
The original part has been modified: https://github.com/chirpy2605/voron/blob/main/V0/Dragon_Burner/STLs/v0.2/Orbiter_v1.5/Hotend_Mounts/V6_Mount_Back.stl So now you can use a V6 Hotend with a Orbiter v1.5 Extruder. No other part mods are…
P
Printables
Gas Burner Holder
I design wall or shelf mounted gas burner holder. I think everone need to have this gas burner when 3D print Need support
P
Printables
Neptune 3 Pro/Plus/Max Afterburner Motor Plate for orignal PCB
INFO The Afterburner motor plate with an added hole. This is designed to be used with the extruder body of the Afterburner (the version with the hole on the side) and one of my mounts for the Neptune 3 series toolhead PCB. REQUIRED…
P
Printables
Dragon Burner Creality Spider Mount
Dragon Burner mount for the Creality Spider All Metal Hotend. You'll need 4 M3 3x3x5 Heat Set Inserts. I've been using it for a few weeks and it's been working perfectly. I'd recommend ABS for the material. Here's the Hotend:…
P
Printables
Voron Stealthburner EBB42 holder
I use it for my custom large format printer, therefore i cannot guarantee the fitment for any standart printermodel.
P
Printables
E3D PZ Probe PCB Mount Stealthburner REMIX
Mount for the E3D PZ Probe PCB for use with Stealthburner with a Cartographer3D CNC carriage. It can also be used with a printed carriage that you can get from Gusk's model . This model has a shallower angle for the PCB than the original…
P
Printables
Stealthburner Large Gear CW2 PG7 umbilical mount
this was patched together from 2 files…i made it in mins so it sucks…. but the one i found wasnt actually for pg7 it was too small…
P
Printables
Display Stand for LEGO Star Wars 75414 The Force Burner Snowspeeder
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
P
Printables
Cartographer Probe Side Mount Dragonburner Hook-on Cowl
This is a modified version of the hook-on dragonburner cowl with screw holes on the side and a mounting piece, which allows operation of the Cartographer probe (or similar). It was designed for my toolchanger but should also work well as…
P
Printables
skull Backflow Incense Burner
This model needs to be printed with supports en be careful when removing the supports on the teeth so you do not snap them off. On to of the skull i placed a porcelain insulator you can find it here:…
P
Printables
Combined FatBurner with 40mm fan mount and duct
Background I bought the Ender3 V3 KE this year (2025) and it seems the original FatBurner toolhead cover is not fully compatible with my revision of this printer, so I ended up printing Ronald Rademaker's combined version. It fit and…
P
Printables
Dragon Burner Fan Duct V8 to Raise3D Pro2
This is a mod to change the original part cooling fans from the Raise3D Pro2 to using blower style 4010 which provide much, much more cooling power. I used the DragonBurner V8 design and made a few cuts and adjustments to it would fit the…
P
Printables
Dragon Burner v8 Ender 3 Plate Adapter
I liked/needed to use VOID's remix of HammerSpb's Dragon Burner Ender 3 mount, but also keep using my BLtouch, which isn't supported in VOID's remix. So i reimplemented the BLtouch support in VOID's model. I haven't actually printed this…
P
Printables
Tronxy x5sa Afterburner adapter
I'm on a mission to upgrade my Tronxy X5SA into a truly great machine. This adapter lets you combine all the hardware from a Voron Afterburner kit with the existing Tronxy components to make the installation seamless. It let's us reuse…
P
Printables
Dragon Burner v8 Ender 3 Hotend Mount
This model makes the Ender 3 hotend compatible with the Dragon Burner toolhead by Chirpy2605. My hotend uses a Copperhead heat break from slice engineering, which adds 1 mm to the length of the hotend. So i have made in total four…
P
Printables
anycubic vyper stealthburner mod
Moved to this Page: https://www.printables.com/model/496044-anycubic-vyper-kobra-stealthburner-mod-bowden-and-
P
Printables
Dragon Burner V8 - Chube Compact Integration
Use this to integrate your new Luke's Lab Chube Compact with your Dragon Burner V8 setup. Supports Top rails only at the moment. You just need to new hotend adapter and the spacers, everything else can be reused! Print with standard Voron…
P
Printables
Dragon Burner V8 Bambu Lab Hotend Mount
Printed in ASA using 6 walls and 60% Gyroid infill. Hardware is 2 M3 heatset inserts and 2 M3 25mm screws.
P
Printables
Voron Stealthburner mod for Ender3 and CR10S printers
This is a custom adaptation of the renowned Voron Stealthburner toolhead system designed specifically for Creality CR-10S and Ender 3 series 3D printers. This modification allows you to upgrade your stock Creality printer with the…
P
Printables
Ender 7 mount for Dragonburner v8 with Bambu Lab hotend V1
I created this model for E7 because the original toolhead was no longer suitable for me. I used a Bambu Lab X1C hotend and a BL touch, which is integrated into the holder, so it doesn't take up space next to it. But it's an experiment,…
P
Printables
Galimeow2 - G2E w/ filament runout sensor, ECAS & Meowburner ears
The model from Alia5, just with glued Wissencat's Meowburner ears. The ears are much thinner than original Meowburner ears as they would conflict with the motor mount.
P
Printables
Dragon Burner + Sherpa Micro - umbilical plate/PCB carrier
PCB holder for Dragon Burner with Sherpa Micro You need 6 M3x5x4 heatset inserts, longer bolts for extruder and 4 M3x8 for carrier itself.
P
Printables
Voron Stealthburner mellow fluxheat lite mount
only one piece, will need some supports additional hardware: 2x M3x16 screws 2x M3 nuts 2x M2x8 screws
P
Printables
DragonBurner Cowl Spacer for Orbiter V2 (Alignment Fix)
This Spacer is a functional part essential for mounting the Orbiter V2.0 Extruder onto the DragonBurner Toolhead (specifically used on a The100 Tank printer build) The primary function of this part is to correct the axial alignment…
P
Printables
Voron StealthBurner Entrance Filament Sensor Using MK3S ir sensor pcb
Voron StealthBurner has no filament sensor, let's add one. In case you have a MK3S's filament sensor retired or spare, we can use it to make a filament sensor for stealthburner. Voron stealthburner…
P
Printables
Stealthburner front mounted eddy probe (works with tap, SB2040)
A relatively simple addition of an eddy probe to the front cover of SB. Allows for it to be easily added to a tap setup with a small (Y-25mm) offset. In my case it can scan the whole bed in my BLV meets trident mashup. This model was…
P
Printables
Mud Kitchen Burners
Outdoor playset mud kitchen burners designed to print four to a Prusa sized build plate. Designed to be held down with a single deck or drywall screw. I print mine in PETG for durability and summer heat at 20% infill gyroid. 0.4mm nozzle…
P
Printables
Dragonburner SpeedClips carriage
You need M3x40 screw to mount dragonburner to the carriage. If you want to print without supports you can rotate mount by 45 degrees and then cut 4mm from the bottom, it prints nicely like that.
P
Printables
Voron stealth burner with K2 and cutter
K2 hotend modification to the Voron 2.4 Stealthburner with clockwork 2. The K2 hotend filament tube extends all the way to the top to be flush with the body where the cutter cuts.
P
Printables
Ender 5 plus Dragon Burner V8 Lazy Mount
This model is for people who don't want to invest too much time but want a strong cfd tested part cooling solution. This model also keeps the original bltouch mount with only a +3mm y offset from the hotend. It works for the stock ender 5…
P
Printables
Stealthburner 4015 square fan ver.
I am not a fan of how the 5015 is ripped apart, it alters the optimized flow. I have plenty of 4015 fans that fit in the space leaving the mounts for the secondary board of the ebb sb2209 can bus. I have also added one for a toolless…
P
Printables
HurakanBurner
This is my fun project for BIQU Hurakan printer with new BIQU H2V2x eftruder and OEM parts , like hotend , conectors plate and mini bl touch .
P
Printables
dragon-burner-v8-ender5-x-carriage-mount
I changed the model to fit a Dragonburner upgrade on my ender5 plus carriage mount. V3 added strength and 2 additional bolts , just need to drill stock carriage plate to accept 2 exsta bolts. Its printed with 0.2mm height, 4 mm width and…
P
Printables
3DO Nozzle Cam Dragonburner Clip Mount
I made a simple clip mount for the 3DO Nozzle Cam on the Dragonburner DB8. Compatible with Micron and Voron 2.4 / Trident printers. It also fits the Voron V0, but without using the front door. I use DB8 with a 2510 fan. You will need a…
P
Printables
Dragon Burner Mod for BugBu printers
Replaces the X carriage. Carriage bolts together with M3x25 from the rear. Dragon Burner mounts to the front. Sherpa mini mounting. to mount stepper to the rear, use sherpa spacer., otherwise motor will face front. need: 8 m3x4x4 heatsets…
P
Printables
Ender 5 & Plus Direct Drive Stealthburner + MMU Filament Hub
This is an amalgamation/remixes of many files from various creators put together to work with stock motor and hotend for the Ender 5 & Plus. Needs a 5015 part cooling fan. DirectDrive: https://www.thingiverse.com/thing:4710174 Extruder…
P
Printables
Dragon Burner MZE Cowl
Allows fitment of 8.5mm Melt Zone Extenders, such as the Trianglelab MZE. Extends the Cowl fan ducts by 8mm. Print with Dragon Burner recomended settings.
P
Printables
StealthBurner phaestus Dragon printhead more Air
StealthBurner phaestus Dragon printhead mod with more Airflow rather than pressurized but hotend.
P
Printables
Stealthburner Clockwork 2 for Mellow 3D ISG IDGA Gears
I adjusted the Clockwork 2 extruder so that the Mellow DIY Integrated Shaft Direct Drive ISG Gear Kit is perfectly positioned. Mellow's hidden hint that something needs to be removed from the guilder helps the gears to run in principle,…
P
Printables
Dragon Burner Cartographer Hall Effect Endstop Carriage Base
A Base to mount a Dragon Burner, Cartographer V4, and a magnet to trigger the XY hall effect endstop to and MGN12H rail.
P
Printables
Zeroclick probe adjusted for Dragon Burner cowl
The magnets are in slightly different positions in the DB zeroclick cowl compared to the ZeroClick probes magnet position. (This might be because of the ZC probe versions are not followed through on the DB github.) I was afraid it will…
P
Printables
Voron Stealthburner BL touch/microprobe adjustable mount
V3.0 is the latest version and more compact due to the 90 degree turn i did with the probe
P
Printables
KP3S Dragon Burner X-Carriage (MGN12C MOUNT)
Support: Need (some area) Infill: 40% Wall line: 4
P
Printables
Improved Beacon/Cartographer mount for Vitalii3D CNC Dragonburner carriage no endstop
I am using sensorless xy homing, so I wanted this improved/modified version without the endstop switch part.
P
Printables
Dragonburner Mounting Plate for Anycubic i3 Mega S
Re-uses one of the bearing holders as well as bolts, bottom bearing holder is replaced with printed part that doubles as belt mount. Belts mounted using Apex Clips https://github.com/ApexArray/ApexClips Dragonburner…
P
Printables
Dragon burner mod for MK8 direct drive
Dragon burner rework to add on MK8 direct drive extruder similar like JG Aurora A8 with type A heat sink. 4010 fan for hot end cooling 4010 blower fan for part cooling twin Nozzle Neopixels No rear mount required direct plug on nema motor…
P
Printables
SV08 hotend Rapidburner mount
Just a fast design in hope of using the sv08 hotend for something instead of laying in a draw
P
Printables
Vinh Nghiem Incense Burner
Vinh Nghiem Incense Burner. The actual incense burner is over 6 feet tall. Huge. This was a satisfying project.
P
Printables
Monolith X-Carriage MGN12H 6mm for Dragonburner w/ Inserts
Revision Log 2026-02-25 -- Initial Release BOM: Qty 8 - M3 Brass Inserts Qty 6 - M3 x 16 Socket Head Cap Screws Print Settings: Material Used: Inland (Micro Center) PETG-CF I just followed the Voron spec for this one: Use PETG-CF or…
P
Printables
Mini Stealthburner Revo Micro Fan-Saver Mount
A simple remix to help keep the fans in place ("fan-saver") for the Revo Micro mount for the Mini Stealthburner toolhead. Print with recommended Voron settings.
P
Printables
Stealthburner Large Gear Clockwork2 PG7 Cable Gland Mount
PG7 cable gland mount for the fourth toolhead on Voron 2.4 Stealthchanger to match the position/height of the other three toolheads using standard Clockwork2 extruders and @CstmCreations_174350 's PG7 mount. Hopefully this saves someone…
P
Printables
Stealthburner with 4010 Part Fans and 4020/4010 Hotend Fan. BTT EBB 2209
Since I love the Stealthburner but its cooling performance is poor, here's my version. For Rapido and Dragon UHF hotends. As hotend fans, the 4010 works at 100% and the 4020 at around 65-70%. Printed in 0,2 mm Layer hight with PC…
P
Printables
Dragon Burner Shroud w/ CR Touch w/o Ears
remixed this so the dragon burner didn't have ears and so the probe was slightly higher to prevent collision
P
Printables
Gridfinity Proxxon Microflame Burner MFB/E (28146)
Besides the Proxxon burner, there is a cutout for a standard matchbox. Remember to let the burner cool down completely before storing inside the container. The model has a footprint of 3 x 4 gridfinity units and has a height of 6…
P
Printables
MGN12H BTT EDDY Mount for Dragonburner
I wanted to run an BTT EDDY on my Dragon Burner but could not find a mount. Just a simple bracket which can be used to position the EDDY to the left or right with proper clearance. Im running a X1C (or clone thereof) and bracket has…
P
Printables
Cartographer Carriage for MadMax and Dragonburner
I wanted to run a shuttle that contained the x endstop and z probing independent of the toolheads on a madmax system. I was also having trouble getting the toolhead probe working reliably enough and this was an easy way around that. The…
P
Printables
outdoor wood burner (HO scale 1:87)
An HO scale 1:87 outdoor wood furnace to keep your model homes heated. larger chimney version should print better on FDM printer Category: Models
P
Printables
#4 or #1 Blade Snapper for Filamentcutter For Dragonburner/Rapidburner Orbiter
Easily snap off #1 and #4 blades for use with these cutters. Print as oriented. Please use proper PPE as hobby blades are hardened and may break in unexpected ways. I held in a vice and used small needle nose pliers to snap the blade. If…
P
Printables
Voron V0 Dragonburner Sherpa Mini EBB36 Gen2 mount
Description There were no EBB36 Gen2 mounts for Voron v0 & Dragonburner & Sherpa Mini using all 4 screws, so I made one. I didn't want only 2 screws holding the PCB with all the forces from the stiff umbilical. I've also included a…
P
Printables
Dragon Burner Creality Spider v3.0 mount
Creality Spider v 3.0 hotend mount for Dragon Burner v8
P
Printables
Tapchanger Dragon Burner Dock Mount - Brass Inserts
I widened the gap on the dockmount becuase I find the hammerhead nuts frustrating to use compared to roll-in T nut. Print at same orientation as original model (on side), add supports. There's a version with and without the spot for the…
P
Printables
Knomi 2 & Halo Dragon Burner v8
BTT Knomi 2 and Mellow Halo mount for Chirpy's Dragon Burner v8. Verified to work with DB V8, Dragon HF, and Orbiter v2.
P
Printables
Voron mgn9c Stealthburner carriage (0.2;Micron)
I made this model to have the same advantages of a stealthburner on a smaller printer, like a Voron 0.2 or a Micron. The hole in the model is for the wires of an inductive probe, if you were to use one. I am going to design another…
P
Printables
FIXED Z AXIS VERSION OF Fatburner ender 3v3 ke cover with fan bases combined
i modifed the model so the z axis switch would actually click itself all remixes all allowed make it even better
P
Printables
Teotihuacan-style incense Burner
Teotihuacan Theater-Type Incense Burner . ( MAKE SURE YOU FIREPROOF THE BASE.. large metal coin fireproof fabric...) Think of this not just as a pot, but as a portable stage for the divine. THE ANATOMY OF A RITUAL In the bustling…
P
Printables
Fysetc ADXL V1.0 Snap Mount for Dragon Burner (Voron 0.2)
This mount is designed to hold a Fysetc ADXL V1.0 accelerometer on the Dragon Burner toolhead of a Voron 0.2. It features a tool-less snap-fit design , meaning no screws are required . The mount can be quickly installed and removed,…
P
Printables
BTT Eddy Rapid Burner Carriage
I designed a MGN12H carriage for the rapid burner toolhead with a Phaetus Dragon UHF hotend to mount a BTT Eddy sensor and use the NG Software for it. The print needs to be supported as shown in the pictures. I uploaded two versions. One…
P
Printables
F-18 based Afterburner nozzle
Printing advices:- First of all i would recommend not spiltting all of the blades while slicing, becuz there are a few model issues in the files. Also If u want ti fit the Nozzle onto EDF i would recommend Scaling it up a bit. ENJOY ^^…
P
Printables
Creality Spider 2/3 Carriage for Voron Stealthburner
Have redesigned an original Voron Hot end Carriage to fit Crealitys Spider series Hot Ends Ive A Spider 2 and Spider 3 in this design requires a few M3 insets 2x20mm flat head bolts mine are ABS per voron print guide 45 mins back 1.5 hrs…
P
Printables
Bambu X1C / P1S / P1 Hotend Stealthburner Printhead Press Fit Only + Wire Clearance
This adapter does not need the difficult to install heat set inserts. It also removes material that can be used for cable clearance so I did away with the redundant mounting holes and added cable clearance and a pathway to snake the…
P
Printables
MadMax Dragonburner Tool Plate w/ Larger Wire Passthrough
Use Zruncho's original print settings from his GitHub: https://github.com/zruncho3d/madmax
P
Printables
Stealthburner_Printhead_Dragon_HF_v2.2 with Filametrix & FilamATrix cutting
Modified Phaetus Dragon High Flow mount for Stealthburner v2.2 with Filametrix Mod . update on 8/5/2026 add FilamATrix Mod
P
Printables
Paella Burner Leveling Feet
Screw levels for Gracima paella burner. Allows for achieving a level cooking surface on non-flat ground. Settings for STL are shown in the attached photo, can be adjusted in the SCAD file.
P
Printables
EBB36 v1.x Orbiter 2.x DragonBurner mount
Introduction This is my second remix of the excellent Orbiter mount made by @niefachowy since I like it so much. Since my earlier remix I have now started using a Dragonburner toolhead as well as the alternative mounts for them.…
P
Printables
Stealthburner Final - "Nutted" edit - Spider/Orbiter 2
more edits 4/26/24: redid the cover for the spider v1, now with a slightly deeper spot for the part cooling fan (tested and fit okay for me, though a piece of tape to help where the duct fits will help - the orbiter 2 is just too long to…
P
Printables
anycubic vyper / kobra stealthburner mod (bowden and direct extruder)
Hello, we would like to introduce you to our stealthburner conversion mod. With this mod, the standard printhead from the vyper is exchanged for a stealthburner printhead (thanks to the Voron community). compatibility list: - anycubic…
P
Printables
Voron Stealthburner CPAP (external fan duct)
I designed this brand new fan duct because I found my Voron 2.4 with Stealth burner is seriously lack of cooling . Moreover, as I really found disassembling my print head from time to time is truly annoying and troublesome , I designed…
P
Printables
Creality K1 D3vil Burner Toolhead Cover with Knomi
Note: the New KnomiV2 files are available now !! The long awaited D3vil Burner by the D3D team, featuring Knomi support, is here! **Introduction** D3vil Design is proud to release the D3vil Burner toolhead cover for the Creality K1 for…
P
Printables
Voron Stealthburner CR Touch ADXL mount
CR Touch Mount for Voron Stealthburner ADXL Mount for V6 Hotend. Y= -1,093mm X= -44,337mm
P
Printables
Nova hotend Toolhead for Stealthburner
This toolhead for the Stealthburner is for the Nova hotend. I have tested it on my Voron and it works nicely.
P
Printables
Tenlog D3Pro Stealthburner Addition
Upgrade to Stealthburner toolheads on the Tenlog D3Pro
P
Printables
Haldis Stealthburner Haldis K1-UHF vulcano
What's an UHF without a vulcano nozzle? This model works just like the Rapido UHF, which uses an extender (expensive nut) for higher flowrates and properly heated filament.. In order accomondate the longer length I've adapted the model of…
P
Printables
Voron 2.4 Stealthburner with CW1 - Cable Cover
This model allows you to partially upgrade your Voron 2.4 r1 to r2 by upgrading to the Stealthburner hotend but keeping the clockwork1 extruder. This part has the same low-poly esthetic of Stealthburner and helps hiding the rounder CW1.…
P
Printables
Voron StealthBurner SB2209 / SB2040 misalignment protector
BTT SB2209 CanBus boards unfortunately have a design flaw that makes it easy to misalign pins in the board to board socket, leading to voltages being delivered to the wrong places. This can ultimately result in damage to electronics, such…
P
Printables
Voron Stealthburner for Artillery Genius and Sidewinder
I have a couple Voron printers. I have a couple other printers of different types. Maintenance is easier when they're more standardized, so I have all of my printers standardized to the Stealthburner. BOM requirements: a bunch of regular…
P
Printables
Voron Stealthburner Latch (ECAS) Reinforced
This is an enforced version of the Voron Stealthburner latch that for the ECAS version has a very thin part that easily breaks. On the the picture, is the original latch thinned to make space for the ECAS shown broken. To prevent…