NEW KNOMI Voron Stealthburner face and mount HEX design
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
NEW BTT KNOMI Stealthburner face
- Ocena
- 5 / 5
- Polubienia
- 141
- Pobrania
- 1027
- Wydruki
- 7
- Wyświetlenia
- 5229
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I liked the HEX design from 3DPMAMSIH and since I plan on using the new BTT KNOMI screen (Also available on Aliexpress) on my Voron 2.4 SB, this is my take on that with the 2 designs together :)
Pre Slice: Highlight objects from file on plate and split to objects so you can make the hex patterns a different color than the main print so the pattern stands out.
Post Print: I have designed the model to print without supports so in the 4 front screw holes, you will need to clear out the 1 layer bridge for the 3mm hole easily done with a drill bit or even just poke a screw through them.
Don't forget to upload your make when printed please :)