Rapido 2 UHF Stealthburner Kit- LW Toolhead
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Updated Rapido UHF from bythorthunder to fit the Rapido 2.
- Ocena
- 5 / 5
- Polubienia
- 61
- Pobrania
- 666
- Wydruki
- 2
- Wyświetlenia
- 3376
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Decided to update the Stealthburner for the Rapido 2 UHF version. This is a remix of the amazing UHF mod by bythorthunder.
(https://github.com/VoronDesign/VoronUsers/tree/main/printer_mods/bythorsthunder/Stealthburner_Rapido_Uhf)
This part also comes with the cooling angry face, and the back side of the cooling assembly. Hope you all like it!
Installation:
Check github page for more information…
Take off black sock, unscrew 3 titanium screws (small sliver ones) and rotate cables 120degs so that it lines up with the cable management port!
Print Settings:
0.4mm nozzle
0.2 layer height (haven't tried 0.1 but might look nicer)
4 perimeters
40% infill
5 top/bottom layers
ASA-CF was used in the picture.
Update: This model will also fit the normal UHF cowling if you're not into the lightweight look. Just take my Angry Face stl, and Back Piece stl and combine with the UHF cowling in the github link below. Happy printing!