Mellow SB2040 Stealthburner Cover with Fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified cover to extend further forward to help resolve the wire pinching for the voron tap.
- Ocena
- 4,8 / 5
- Polubienia
- 92
- Pobrania
- 723
- Wydruki
- 7
- Wyświetlenia
- 4600
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Modified cover to extend further forward to help resolve the wire pinching for the voron tap. Main body for the CW2 needs to be replaced. Based of 3D SB2209, and SB2240 should also work with this modification. The modification uses a 30X7 fan and it may be possible to fit a 30X10 fan. If your using the heat sink on the TMC2209 or the 2040 raspberry PI the height will need to be shorter than what was shipped with the product. Original models was from the Voron team, which I modified to give more clearence. If you don't like the look of the fan I also added the larger cover with no fan. I also added a verson with no fan but hex vent holes for better cooling.