1 / 5
ZEISS Stemi 305 - Eye peace - bore friction retainer. — zdjęcie 1
1 / 5

ZEISS Stemi 305 - Eye peace - bore friction retainer.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a custom-designed friction retainer intended to securely hold the eyepiece within the tube of a Zeiss Stemi 305

Ocena
0 / 5
Polubienia
1
Pobrania
10
Wydruki
1
Wyświetlenia
105
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Engineering
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

This is a custom-designed friction retainer intended to securely hold the eyepiece within the tube of a Zeiss Stemi 305 microscope. This retainer provides reliable bore friction, preventing unwanted movement or slipping of the eyepiece during microscope operation, ensuring consistent positioning and optimal viewing comfort. Easy to print and install, this solution is ideal for anyone experiencing issues with loose or unstable eyepieces. Designed specifically to fit the precise dimensions of the Zeiss Stemi 305, it is recommended to print using PLA for optimal results.

Print Settings Recommendation:

Material: PLA

Layer Height: As low as possible 

Infill: 100%

Supports: Not required

Brim: Recommended (Brim separation: 0.2 mm)

Optimize retraction to get a clean print - or simply cut off the bit where the seam is .

Installation Instructions: Simply slide the retainer into the microscope tube, followed by the eyepiece. Adjust as needed for desired friction and stability.

 

Tagi