The Grimm Masquerade - Board Game Insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Grimm Masquerade - Board Game Insert
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 8
- Wydruki
- 1
- Wyświetlenia
- 55
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Grimm Masquerade - Board Game Insert
Notes:
- No Supports necessary.
- Designed using Gamegenic Standard Sleeves.
This insert was done because the factory one just didn't hold up for me. Personally I feel like this game could be in a smaller box. The design was not designed with Filament conservation in mind. I wanted the game to be easier to store and setup. I hope you enjoy.
With this insert, I have provided both the STLs and my Personal Bambu .3mf for how I printed it. I hope it helps. If you have any questions please do not hesitate to ask. I am always happy to help.
Print the following for Organization:
1x GM_Artifacts_Bottom_v0
1x GM_Cards_v0
1x GM_Shields_v0
1x GM_Bits_v0
1x GM_CharacterCards_v0
1x GM_Artifacts_Lid_v0
I designed this to be storable both flat on the bottom and sideways in a Kallax.
Noted Instructions:
All were Printed at .2mm Layer Height. 15% Cubic Infill 5 Top and 3 Bottom Layers