The Grimm Masquerade - Board Game Insert
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The Grimm Masquerade - Board Game Insert
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 8
- Makes
- 1
- Views
- 55
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The Grimm Masquerade - Board Game Insert
Notes:
- No Supports necessary.
- Designed using Gamegenic Standard Sleeves.
This insert was done because the factory one just didn't hold up for me. Personally I feel like this game could be in a smaller box. The design was not designed with Filament conservation in mind. I wanted the game to be easier to store and setup. I hope you enjoy.
With this insert, I have provided both the STLs and my Personal Bambu .3mf for how I printed it. I hope it helps. If you have any questions please do not hesitate to ask. I am always happy to help.
Print the following for Organization:
1x GM_Artifacts_Bottom_v0
1x GM_Cards_v0
1x GM_Shields_v0
1x GM_Bits_v0
1x GM_CharacterCards_v0
1x GM_Artifacts_Lid_v0
I designed this to be storable both flat on the bottom and sideways in a Kallax.
Noted Instructions:
All were Printed at .2mm Layer Height. 15% Cubic Infill 5 Top and 3 Bottom Layers