1 / 3
Filament Drybox (the best-of-the-best components), adapted for "Kichly" boxes — zdjęcie 1
1 / 3

Filament Drybox (the best-of-the-best components), adapted for "Kichly" boxes

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Some slightly altered parts from @SteveT's excellent compilation, for use with "Kichly" boxes instead of "Skroam"

Ocena
0 / 5
Polubienia
15
Pobrania
93
Wydruki
0
Wyświetlenia
948
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Introduction:

SteveT did a great job collating parts and doing a writeup of the assembly, I just didn't pay close attention when buying parts and ordered the wrong bins. These were branded “Kichly” rather than “Skroam”; the biggest difference is the shape of the pouring opening. I figured remodelling was faster and less wasteful than sending them back. I've uploaded these because they might save someone else who's made the same mistake a bit of work.

Instructions:

  • Do mostly what it says in SteveT's original, just swap his parts for mine where applicable.
  • NB: I've done the dessicant bin a little differently: mine keeps the original flip-up lid in place, and just places the bin inside the existing lid. You'll need to cut off most of the little lip used for opening it so that the whole box can sit flat on a surface, but the small bit that remains should be enough to open it when necessary. 

Tagi