1 / 2
20x20mm to 25.5x25.5mm Whoop Adapter with brass inserts
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An proper adapter plate with heat inserts to mount a 25.6x25.6mm whoop style PCB onto a 20x20mm mounting pattern
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 195
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple but reliable, universal adapter board using heat inserts and screws.
I did not like any of the existing adapters as they are either a pain in the ass to install, expect you to screw into plastic or use flimsy pegs.
- Print from anything that isn't PLA or TPU. I recommend Polycarbonate/Nylon.
- Melt 4x M2x3 heat inserts into the inner, smaller 20x20 pattern holes. Make sure to line them up straight!
- Mount the adapter onto your PCB using M2 socket head screws in the outer, bigger 25.6x25.6 pattern holes, so that the heat inserts and the screw heads are on the bottom. Secure the screws with nuts.
- Mount the adapter+PCB onto your frame using 4x M2 screws of length 4mm+(thickness of your frame) + Loctite.