Prusa XL Nozzle Brush & Debris Bucket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A variation on the nozzle brushes and debris buckets.
- Ocena
- 5 / 5
- Polubienia
- 42
- Pobrania
- 194
- Wydruki
- 7
- Wyświetlenia
- 873
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This variation of the Nozzle Brush and Debris Bucket from @Alvomane came about as I wanted to use slightly different style of silicon brush than the original. So rather than just modify the brush holder, I modeled up both since they work closely together.
The nozzle brush was acquired from AliExpress, they're for the “A1 Mini”. You can see what they look like in the photos. I liked these because the brush was a little finer, a little longer, more compliant, and had a deeper mounting base. You'll cut these in half, so you get two from each.
Printing Tips
- Slice your own for best results.
- The nozzle brush should be printed at an angle and requires supports from the build plate (I used organic, with 30% overhang coverage).
- The bucket does not require supports.