1 / 5
Prusa XL Nozzle Brush & Debris Bucket
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A variation on the nozzle brushes and debris buckets.
- Rating
- 5 / 5
- Likes
- 42
- Downloads
- 194
- Makes
- 7
- Views
- 873
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This variation of the Nozzle Brush and Debris Bucket from @Alvomane came about as I wanted to use slightly different style of silicon brush than the original. So rather than just modify the brush holder, I modeled up both since they work closely together.
The nozzle brush was acquired from AliExpress, they're for the “A1 Mini”. You can see what they look like in the photos. I liked these because the brush was a little finer, a little longer, more compliant, and had a deeper mounting base. You'll cut these in half, so you get two from each.
Printing Tips
- Slice your own for best results.
- The nozzle brush should be printed at an angle and requires supports from the build plate (I used organic, with 30% overhang coverage).
- The bucket does not require supports.