#0201 "Stubbs Spinner" Compact Driver Handle [for standard bits]

*** Thanks for checking out this model! ***

If you appreciate what I'm doing, consider buying me a coffee, and check out my other models for something else you might like!  

*********

Key Features:

1. Print in place - no assembly required.
2. Designed to fit standard bits (see picture).
3. Spring finger provides a strong hold on the bit - will not slip out.
4. Includes spinner base - for when you need to push and turn at the same time.

Recommendations:

1. Print with the high end of material's temperature range for maximum layer adhesion and strength.
2. Use PETG/ABS/ASA for some flex.
3. Regular PLA is not recommended, but I like PLA Pro that has some flexible characteristics. Tested with Polymaker PLA Pro.
4. Print with 3 or more vertical walls, 20% infill.
5. Print with a 3-4mm brim, set at 0.05mm separation, for printing stability in the upright orientation of the .stl file, then remove brim with a deburring tool, like this one.

After the print:

1. Use a utility blade to separate the spinner from the base, around the perimeter.
2. Use a coin to turn the spinner base until it breaks loose.
3. Add a small drop of 3-in-1 oil in the spinner base's slot to allow it to spin smoothly.
4. Enjoy your new driver handle!

**********

If you add this to your collection and/or download the model, please >click< the LIKE button and give it some STARS!

Remember, you can earn some Prusameters if you post a pic of your make!  Plus, it would make my day to see it. ;-D

Happy Printing!

P.S. Please post some constructive feedback if you'd like to see something improved.