#0201 "Stubbs Spinner" Compact Driver Handle [for standard bits]
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A print-in-place (PiP) compact driver handle that truly holds onto your bits.
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 48
- Makes
- 0
- Views
- 265
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
*** Thanks for checking out this model! ***
If you appreciate what I'm doing, consider buying me a coffee, and check out my other models for something else you might like!
*********
Key Features:
- Print in place - no assembly required.
- Designed to fit standard bits (see picture).
- Spring finger provides a strong hold on the bit - will not slip out.
- Includes spinner base - for when you need to push and turn at the same time.
Recommendations:
- Print with the high end of material's temperature range for maximum layer adhesion and strength.
- Use PETG/ABS/ASA for some flex.
- Regular PLA is not recommended, but I like PLA Pro that has some flexible characteristics. Tested with Polymaker PLA Pro.
- Print with 3 or more vertical walls, 20% infill.
- Print with a 3-4mm brim, set at 0.05mm separation, for printing stability in the upright orientation of the .stl file, then remove brim with a deburring tool, like this one.
After the print:
- Use a utility blade to separate the spinner from the base, around the perimeter.
- Use a coin to turn the spinner base until it breaks loose.
- Add a small drop of 3-in-1 oil in the spinner base's slot to allow it to spin smoothly.
- Enjoy your new driver handle!
**********
If you add this to your collection and/or download the model, please >click< the LIKE button and give it some STARS!
Remember, you can earn some Prusameters if you post a pic of your make! Plus, it would make my day to see it. ;-D
Happy Printing!
P.S. Please post some constructive feedback if you'd like to see something improved.