Picopresso stand V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Coffee maker stand or Picopresso, updated.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 181
- Wydruki
- 0
- Wyświetlenia
- 851
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
The Picopresso coffee maker is great to use and even better if you have a stand so you can squeeze the plunger without moving the unit as you pump. The stand also helps to have somewhere to sit the machine once you have completed the coffee extraction.
I have added version 2 of my model here as it was suggested that I reduce the amount of support and stiffen the stand. Print on the side using 3 or 4 perims and at least 25% infill. This version only requires support for the two openings, and if you use the “everywhere” default support creation it seems to add support the correct locations. I would suggest using PLA for printing this one.