1 / 2
TwoTrees TTC-450 / OpenBuilds CNC 65 mm spindle holder adapter - 80x25 hole distance
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Plate to attach 65 mm CNC spindle holder to TTC-450 routers. Designed for holder using 80x25 mm hole distance.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 165
- Wydruki
- 0
- Wyświetlenia
- 527
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (14)Powiązane
Plate to attach 65 mm CNC spindle holder from Aliexpress to TTC-450 machine.
Designed for holders that use 80x25 mm mounting hole distances.
This plate is thick for a reason! You need a specific distance from the router to the machine so the router motor/switch/cable part does not hit the Z-gantry as it moves up and down.
Printing settings (PLA is fine):
- 25% infill (may be lower, TTC-450 gantry is like a gummy bear so it will deflect way before PLA does, lmao).
- 4 top/bottom layers
- 4 walls
Bill of materials:
- 4 x M5x15 (M5x16 is better if you have it, M5x20 may work too but be careful) screws. 4 screws is enough to keep it firm in place.
- 4 x M6x75 screws - screws which came with your 65 mm holder are too short.
- 4x M6 nuts
Have fun and remember to check GrblHAL or FluidNC firmware for your TTC-450 router
