1 / 2
TwoTrees TTC-450 / OpenBuilds CNC 65 mm spindle holder adapter - 80x25 hole distance — image 1
1 / 2

TwoTrees TTC-450 / OpenBuilds CNC 65 mm spindle holder adapter - 80x25 hole distance

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Plate to attach 65 mm CNC spindle holder to TTC-450 routers. Designed for holder using 80x25 mm hole distance.

Rating
0 / 5
Likes
6
Downloads
166
Makes
0
Views
534
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution

Plate to attach 65 mm CNC spindle holder from Aliexpress to TTC-450 machine.

Designed for holders that use 80x25 mm mounting hole distances.

This plate is thick for a reason! You need a specific distance from the router to the machine so the router motor/switch/cable part does not hit the Z-gantry as it moves up and down.

Printing settings (PLA is fine):

  • 25% infill (may be lower, TTC-450 gantry is like a gummy bear so it will deflect way before PLA does, lmao).
  • 4 top/bottom layers
  • 4 walls

Bill of materials:

  • 4 x M5x15 (M5x16 is better if you have it, M5x20 may work too but be careful) screws. 4 screws is enough to keep it firm in place.
  • 4 x M6x75 screws - screws which came with your 65 mm holder are too short.
  • 4x M6 nuts

 

Have fun and remember to check GrblHAL or FluidNC firmware for your TTC-450 router

Tags