Minimalist MINI-Knob
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Give your Prusa Mini a new style in just about 20 minutes.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 65
- Wydruki
- 3
- Wyświetlenia
- 343
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I was looking for a small and minimalistic looking new knob for my Pursa MINI and made this my first design. You can rotate and press the knob with just one finger without changing finger position. The knob has the smallest possible size and is adapted to the design of the LCD panel.
Print instructions
I tested the print with the 0.4mm nozzle under the standard print setting for Prusament PLA and Extrudr PLA NX2 in “0.15mm QUALITY”.
Can be printed without supports. To avoid overhangs it has to be printed upside down (prepared in the files). I do not have a structured steel sheet, but it should also work very well.