1 / 6
GEPRC CineLog25 V2 o4 Pro Mount (CL25v2)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Camera / AirUnit (DJI o4 Pro) mount for the GEPRC Cinelog25 v2 (Cl25 v2)
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 217
- Wydruki
- 0
- Wyświetlenia
- 1039
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Model:
This model fits the Cinelog25 v2. It is used to mount the DJI o4 Air Unit Pro. It is compatible with ND-Lenses.
Print Instructions:
Material: TPU, I used the Eryone TPU Filament
Placement: Place the model on the bottom, just as the 3d-file
Support Material: Yes, everywhere. If using the Prusa Slicer choose “Organic”
Infill: Cubic, 75-85%
Resolution: 0.2 is absolutely fine, at least 2 perimeters
Hints:
- Remove the rubber vibration dampers from the carbon fibre plate and insert them in the 3d-print first. It makes assembly way easier. The holes are exactly the same size as the original plate, so no need to adjust them, just be patient
- Screw in the O4 Air Unit using the 4 screws of the original Cinelog25v2 camera assembly
- Use the four O4 Air Unit screws (that were previously provided with the air unit) to secure the air unit module at the bottom plate