MGT Compatible Phone Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This phone holder is designed to work with Wyrmwood's Modular Gaming Table.
- Ocena
- 4 / 5
- Polubienia
- 24
- Pobrania
- 140
- Wydruki
- 1
- Wyświetlenia
- 870
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This was designed to be compatible with Wyrmwood's Modular Gaming Table. This will fit on the inside rail and hold your phone in either landscape or portrait orientations at a 25 degree angle. There is a notch that will keep the phone from tipping when in portrait orientation. There is enough space to allow the stand to slide in the rail without scratching the finish.
It is designed to accept 3/8"x1/8" round magnets. I purchased these countersunk magnets from totalelement. They are friction fit into the holes, no adhesive or fasteners needed. The tolerance is very tight, so you will need to press the magnets in with some force (I pressed against a table).