Raspberry Pi Birdbox camera mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
I wanted to mount aRaspberry Pi camera module inside a bird box so I could stream live pictures from the box to the internet. I documented the project here. I thought it important that the camera was securely mounted, I did not want the camera to be knocked or become detached, since once birds move in it would not be possible to adjust to reattach it.
I therefore designed this 3D printed camera mount. It is designed to hold the Raspberry Pi camera, either the standard module or the IR version along with a 5mm IR LED held in position with a bezel. I also provided a small light baffle so the IR LED did not cause glare on the camera.
Print Settings
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Notes:
I had a friend print this for me, so I cannot comment on any of the settings above, sorry.
Category: DIY