Raspberry Pi Birdbox camera mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I wanted to mount a Raspberry Pi camera module inside a bird box so I could stream live pictures from the box to the…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 71
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Share Alike
I wanted to mount aRaspberry Pi camera module inside a bird box so I could stream live pictures from the box to the internet. I documented the project here. I thought it important that the camera was securely mounted, I did not want the camera to be knocked or become detached, since once birds move in it would not be possible to adjust to reattach it.
I therefore designed this 3D printed camera mount. It is designed to hold the Raspberry Pi camera, either the standard module or the IR version along with a 5mm IR LED held in position with a bezel. I also provided a small light baffle so the IR LED did not cause glare on the camera.
Print Settings
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Notes:
I had a friend print this for me, so I cannot comment on any of the settings above, sorry.
Category: DIY