1 / 5
Voron 2.4 / mammoth-3D 30T long-shaft motor mounts — zdjęcie 1
1 / 5

Voron 2.4 / mammoth-3D 30T long-shaft motor mounts

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This simple upgrade can significantly improve your Voron 2.4's printing speed.

Ocena
0 / 5
Polubienia
55
Pobrania
106
Wydruki
0
Wyświetlenia
1723
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

A few years ago, your Voron 2.4 3D printer was considered fast. However, after four years of technological advancements, newer printers on the market now print much faster than yours.

Should you buy a new 3D printer? Upgrade to AWD? That can be complicated and expensive.

Or, you could simply make a small upgrade to your existing Voron 2.4 and bring it up to the speeds of modern printers.

What do you need for this upgrade? Can you reuse your existing screws and bearings?

Yes! You can reuse all your existing screws and bearings—only replace them if necessary.

Bill of Materials (BOM):

  • 2x new M5 long-shaft NEMA17 motors – This upgrade was designed for Kraken Motors, but you can also use 2504 or 2804 long-shaft motors.
  • 4x heat inserts
  • 4x M3x6 BHCS screws
  • 2x F695 bearings
  • 2x M5 30T pulleys (only required for Kraken Motors)
  • New 3D-printed motor mounts to support the bearings and long-shaft motors.

This simple upgrade can significantly improve your Voron 2.4's printing speed, keeping it competitive with modern machines.

If you need help or have any questions, feel free to join our Discord community. We're here to assist and would love to connect with you!
https://discord.gg/3JxrSnGgsF

YouTube
https://www.youtube.com/@mammoth-3D

Tagi