Framework Laptop 16 stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Laptop stand putting the laptop at an angle to save horizontal space.
- Ocena
- 4 / 5
- Polubienia
- 7
- Pobrania
- 57
- Wydruki
- 1
- Wyświetlenia
- 372
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
This is a simple part to be printed twice. Put on each side of the laptop but pay attention to the expansion card latches : the stand parts must be positioned on flat surfaces so must sit behind them (see pictures).
For fast printing and robustness I advise printing on its side with 3 perimeters and a low infill. It doesn't sit near a heat source on the laptop so PLA is fine.
For reference mine was printed with 5% gyroid with 3DJake Lavender EcoPLA on a Prusa Mini with a 0.4mm nozzle using PrusaSlicer's 0.20mm structural profile.
Update : it was originally designed to have the screen vertical when fully opened, I added another version with a 15 degree tilt for people having a different setup (where their eye level is above the screen typically).
Onshape source : https://cad.onshape.com/documents/f8b8f8a14b55e0d0088003c1/w/c6b8180b7f8d443a6d92d030/e/4f91faef3be7ccc07a75c37f