Framework Laptop 16 stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Laptop stand putting the laptop at an angle to save horizontal space.
- Rating
- 4 / 5
- Likes
- 7
- Downloads
- 57
- Makes
- 1
- Views
- 372
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
This is a simple part to be printed twice. Put on each side of the laptop but pay attention to the expansion card latches : the stand parts must be positioned on flat surfaces so must sit behind them (see pictures).
For fast printing and robustness I advise printing on its side with 3 perimeters and a low infill. It doesn't sit near a heat source on the laptop so PLA is fine.
For reference mine was printed with 5% gyroid with 3DJake Lavender EcoPLA on a Prusa Mini with a 0.4mm nozzle using PrusaSlicer's 0.20mm structural profile.
Update : it was originally designed to have the screen vertical when fully opened, I added another version with a 15 degree tilt for people having a different setup (where their eye level is above the screen typically).
Onshape source : https://cad.onshape.com/documents/f8b8f8a14b55e0d0088003c1/w/c6b8180b7f8d443a6d92d030/e/4f91faef3be7ccc07a75c37f