I win, You lose - Coin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A coin with "*I win* + club" on one side, and "*You lose* + skull" on the other. Different sizes.
- Ocena
- 4 / 5
- Polubienia
- 10
- Pobrania
- 49
- Wydruki
- 2
- Wyświetlenia
- 131
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A coin with "I win + club" on one side, and "You lose + skull" on the other. Different sizes:
- 22 mm (0.87 inch): A realistic coin size. Best with a 0.2 mm nozzle (0.06 mm height) or in resin. You (probably) won't get good results with a 0.4 mm nozzle.
- 33 mm (1.3 inch): Decent results with a 0.4 mm nozzle (0.08 mm height). Still a manageable size for playing heads or tails.
- 55 mm (2.17 inch): Small medal size. Suitable for layer heights bigger than 0.08 mm.
You will get optimal results with resin instead of classical filaments.
I printed the 33 mm size with silk PLA, 0.4 mm nozzle and a layer height of 0.08 mm.
Printing tips if you use filament: Print it vertically, with the letters horizontally aligned with the y-axis, and with thin manual tree supports painted on the bottom edge of the coin.
The .3mf file is already configured with these parameters for the 33 mm size in BambuLab. I don't know if it will load all the presets into PrusaSlicer and similar, but I hope so.
If you're printing it lying down (not recommended) to save time and material, make sure you have a smooth but adherent plate, and perfectly adjusted parameters for the bridges and overhangs for a good result on the underside.