23 modeli
Do you like the original Prusa design, but the last know of theirs just won't cut it with the flan top surface? Here is the same thing but with a hollow as in the previous design. Does this print well? Not so much: you need support…
Layer height: 0,2 mm; Nozzle 0,4; Material: PLA Depending on the print quality, it may be necessary to rework the sliding surfaces slightly with sandpaper. For a longer service life, a little lubricant should be applied. I hope you like…
UK Google translate: Updates to Hiwin Linear Rail on PRUSA I3 MK3S+ Here are all the printed parts needed for rebuilding/updating your PRUSA I3 MK3S+ I have spent a lot of time adapting the original plastic parts so that they fit and work…
This is our first mod for Prusa MINI, mod for upgrade Y axis to linear rails, tested with approved selftest. -With Multicolor Frontal. BOM -Rails hiwin MGN12 280mm (x2) -MGN12C (x3) 4x DIN912 M3X10 (For the ends of the guides) 4x DIN985…
This is a remix of the original triwing LCD knob that comes with the MK3S+. I like the textured surface on the original knob, but dislike the flatness of the pressing area. There are other concave remixes of the same knob, but they do not…
This TriWing 3D snowflake consists of 3 wings - for much better 3D-effect from all sides 360° - and easy print and assembly. There are not many snowflakes out there with 3 parts, so I had to create a new one by modifying an existing one.…
TIKKIWING - Control Horn 0.2mm Layer / 80% Infill / No support PLA/PETG
those are almost like the original model. but with a little bit of chamfer for easier installation.
TIKKIWING - Motor mount Fit AXIS Flying AF204 - 2910KV 0.2mm Layer / 80% Infill / No support PLA/PETG Use thread lock on the motor screws
TIKKIWING - Motor mount Fit DYS 1806 2300kv 0.2mm Layer / 80% Infill / No support PLA/PETG Use thread lock on the motor screws
TIKKIWING - Landing skid 0.2mm Layer / 80% Infill / No support PLA/PETG
Modified for Hiwin mgn12 and Igus RJUM-01-08
An Altoid Tin insert for 5 counter sinking bits
Intransitive dice are numbered so there is always a better and a worse dice to choose. It is like the “rock, paper, scissor” game but each represented as a dice. Like rock sometimes punches paper but on average it gets wrapped. As…
Prototype. Might have to grind down the linear rail for clearance where the tensioner is inserted.
sick of debry in the holes off your lineair rail Also usable for the prusa xl simple but effective sorry made it in prusa slicer but ill put the gcode for the mini and the mk3s+ its a little bit oversized push it in with an hex or…
Here are two versions of a revisited triwings knob for the Prusa MK3 : a monocolor version and a multicolor version This new dual part triwings knob can be printed in a dual color pattern without any multicolor system, the two parts can…
Quick design in fusion to hold a dial indicator and check the level of the heat bed when the X-axis has the Hiwin linear rail modification. Dial indicator shank 8mm. Requires a M4 by 16mm or 20mm screw. Dial indicator fit snugly in the…
If you, like me, have one of these chargers in your computer bag. Then maybe you also need a nice way to organize your charger cable. It that case, how about storing the cable on the charger? Made for a charger I found on Amazon:…
This is for the Swiwin GSU. You can use this to mount the ecu to any flat surface. Friction tight fit.
A compact, keychain-size key for removing and refitting Sea-Doo style rear hull drain plugs on jet skis. Why it works: Wide wing handle gives real torque, even with wet or sandy hands Keyring hole so it lives on your lanyard or ski key…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/hI7W6FU7fid Category: 3D Printing
Remodeled Winch Truck bumper for winch from Aliexpress. https://www.aliexpress.com/item/4001275874900.html?spm=a2g0o.order_list.0.0.519018028Aaak2
