Dial indicator for Mk3s with hiwin rails mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is to mount a dial indicator to the X axis when the top rod has been replaced by a Hiwin 12mm rail.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 280
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Quick design in fusion to hold a dial indicator and check the level of the heat bed when the X-axis has the Hiwin linear rail modification.
Dial indicator shank 8mm.
Requires a M4 by 16mm or 20mm screw. Dial indicator fit snugly in the hole already. Do not overtighten the tightening screw.
Redesign of the clamping of the dial. Now in 2 parts, printing in different orientation makes the clamp stronger. Just need to add another M4 screw.
Found a similar design by user Dan. Gave me the idea to design one to suit modded X-axis